Table of Contents
Advertisement
Using the startup-config and running-config Files
Using the startup-config and running-config Files
Changing the startup-config and running- config Files
Cisco Global Site Selector Administration Guide
2-12
When you make device configuration changes, the GSS places those changes in a
virtual running configuration file (called running-config). Before you log out or
reboot the GSS, you must copy the contents of the running-config file to the
startup-configuration file (called startup-config) to save configuration changes.
The GSS uses the startup-config file on subsequent reboots.
This section contains the following procedures:
Changing the startup-config and running- config Files
•
•
Saving the startup-config and running-config Files
Loading the startup-config from an External File
•
Displaying the running-config File
•
Displaying the startup-config File
•
The network configuration for a GSS device includes the following:
Interface—Ethernet interface in use
•
IP address—Network address and subnet mask assigned to the interface
•
GSS communications—Interface (Ethernet 0 or Ethernet 1) designated for
•
handling GSS-related communications on the device
GSS TCP keepalives—Interface (Ethernet 0 or Ethernet 1) designated for
•
outgoing keepalives of type TCP and HTTP HEAD
Hostname—Hostname assigned to the GSS
•
IP default gateway—Network gateway used by the device
•
IP name server—Network DNS server being used by the device
•
IP routes—All static IP routes
•
SSH enable—SSH state of the GSS device (enabled or disabled)
•
Telnet enable—Telnet state of the GSS device (enabled or disabled)
•
•
FTP enable—FTP state of the GSS device (enabled or disabled)
FTP client enable—FTP client state of the GSS device (enabled or disabled)
•
Chapter 2
Managing the GSS from the CLI
OL-10410-01
Hide quick links:
Advertisement
Table of Contents
