Table of Contents
Advertisement
Configuring VMPS
Configuring Dynamic-Access Ports on VMPS Clients
Dynamic-access port VLAN membership is for end stations or hubs connected to end stations.
Caution
Connecting dynamic-access ports to other switches can cause a loss of connectivity.
Beginning in privileged EXEC mode, follow these steps to configure a dynamic-access port on a VMPS
client switch:
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3n
no shutdown
Step 4
port-type uni
Step 5
switchport mode access
Step 6
switchport access vlan dynamic
Step 7
end
Step 8
show interfaces interface-id switchport
Step 9
copy running-config startup-config
To return an interface to its default configuration, use the default interface interface-id interface
configuration command. To reset the access mode to the default VLAN for the switch, use the no
switchport access vlan interface configuration command.
Reconfirming VLAN Memberships
Beginning in privileged EXEC mode, follow these steps to confirm the dynamic-access port VLAN
membership assignments that the switch has received from the VMPS:
Command
Step 1
vmps reconfirm
Step 2
show vmps
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
11-26
Purpose
Enter global configuration mode.
Specify the switch port that is connected to the end station, and enter
interface configuration mode. The port must be a UNI.
Enable the port.
Configure the port as a UNI.
Set the port to access mode.
Configure the port as eligible for dynamic VLAN membership.
The dynamic-access port must be connected to an end station.
Return to privileged EXEC mode.
Verify your entries in the Operational Mode field of the display.
(Optional) Save your entries in the configuration file.
Purpose
Reconfirm dynamic-access port VLAN membership.
Verify the dynamic VLAN reconfirmation status.
Chapter 11
Configuring VLANs
78-17058-01
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
