Table of Contents
Advertisement
Chapter 34
Configuring IP Multicast Routing
Configuring IP Multicast Routing
These sections contain this configuration information:
•
•
•
•
•
•
•
Default Multicast Routing Configuration
Table 34-2
Table 34-2
Feature
Multicast routing
PIM version
PIM mode
PIM RP address
PIM domain border
PIM multicast boundary
Candidate BSRs
Candidate RPs
Shortest-path tree threshold rate
PIM router query message interval
Multicast Routing Configuration Guidelines
To avoid misconfiguring multicast routing on your switch, review the information in these sections:
•
•
78-17058-01
Default Multicast Routing Configuration, page 34-7
Multicast Routing Configuration Guidelines, page 34-7
Configuring Basic Multicast Routing, page 34-9
Configuring a Rendezvous Point, page 34-10
you want to treat the group as a sparse group)
Using Auto-RP and a BSR, page 34-20
Cisco PIM v1 devices))
Monitoring the RP Mapping Information, page 34-21
Troubleshooting PIMv1 and PIMv2 Interoperability Problems, page 34-21
shows the default multicast routing configuration.
Default Multicast Routing Configuration
PIMv1 and PIMv2 Interoperability, page 34-8
Auto-RP and BSR Configuration Guidelines, page 34-8
(required)
(required if the interface is in sparse-dense mode, and
(required for non-Cisco PIMv2 devices to interoperate with
(optional)
Default Setting
Disabled on all interfaces.
Version 2.
No mode is defined.
None configured.
Disabled.
None.
Disabled.
Disabled.
0 kbps.
30 seconds.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Configuring IP Multicast Routing
(optional)
34-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
