Table of Contents
Advertisement
Chapter 7
Card Provisioning
Table 7-4
Subtab
Sonet
Thrshld
Alarming
Step 5
Click Apply.
Repeat Steps 4 – 5 for each subtab that has parameters you want to provision.
Step 6
7.2.4 DS3XM-6 Card Parameters
The DS3XM-6 transmux card can accept up to six DS-3 signals and convert each signal to 28 VT1.5s.
Conversely, the card can take 28 T-1s and multiplex them into a channeled C-bit or M23 framed DS-3.
Unlike the DS3-12 and DS3N-12 cards, the DS3XM-6 allows circuit mapping at the VT level.
on page 7-12
November 2001
DS3E Card Parameters (continued)
Parameter
Description
CV
Coding violations
ES
Errored seconds
FC
Failure count
SES
Severely errored seconds
UAS
Unavailable seconds
Port
Port number
Profile
Sets the alarm profile for the
port.
Suppress
Suppresses alarm display for the
Alarms
port.
shows parameters that you can provision for each port.
Options
Numeric. Defaults (Near End STS
termination):
•
15 (15 minutes)
•
125 (1 day)
Numeric. Defaults (Near End STS
termination):
•
12 (15 minutes)
100 (1 day)
•
Numeric. Defaults (Near End STS
termination):
10 (15 minutes)
•
10 (1 day)
•
Numeric. Defaults (Near End STS
termination):
3 (15 minutes)
•
•
7 (1 day)
Numeric. Defaults (Near End STS
termination):
•
10 (15 minutes)
•
10 (1 day)
1 - 12
Default
•
Inherited
•
Custom profiles (if any)
•
Unselected (default)
•
•
Selected
Cisco ONS 15454 Installation and Operations Guide
Provisioning Electrical Cards
Table 7-5
7-11
Advertisement
Table of Contents
