Table of Contents
Advertisement
Provisioning Electrical Cards
Procedure: Modify Line and Threshold Settings for the DS3XM-6 Card
Step 1
Display the DS3XM-6 in CTC card view.
Step 2
Click the Provisioning tab.
Depending on the setting you need to modify, click the Line, Line Thrshld, Elect Path, or Sonet
Step 3
Thrshld subtab.
Note
Step 4
Modify the settings shown in
double-click the field and type the new number.
Table 7-5
Subtab
Line
Line Thrshld
Cisco ONS 15454 Installation and Operations Guide
7-12
See
Chapter 10, "Alarm Monitoring and Management"
Behavior tab.
Table
DS3XM-6 Parameters
Parameter
Description
Port #
Port number
Port
Port name
Line Type
Defines the line framing type
Line Coding
Defines the DS-1 transmission
coding type that is used
Line Length
Defines the distance (in feet)
from backplane connection to
the next termination point
Status
Places port in or out of service
CV
Coding violations
ES
Errored seconds
SES
Severely errored seconds
Loss
Loss of signal
7-5. For drop-down lists, select an item from the list. For numerics,
Chapter 7
Card Provisioning
for information about the Alarm
Options
1 - 6
To enter a name for the port, click the
cell and type the name. To change a
name, double-click the cell, then edit
the text.
•
M23 - default
C BIT
•
•
B3ZS
•
0 - 225 (default)
•
226 - 450
•
Out of Service (default)
•
In Service
Numeric. Defaults:
387 (15 minutes)
•
3865 (1 day)
•
Numeric. Defaults:
25 (15 minutes)
•
•
250 (1 day)
Numeric. Defaults:
•
4 (15 minutes)
40 (1 day)
•
Numeric. Defaults:
10 (15 minutes)
•
10 (1 day)
•
November 2001
Advertisement
Table of Contents
