Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 31
Installation guide
Hide thumbs
Also See for 6503 - Catalyst Firewall Security Sys:
- White paper (19 pages) ,
- Product bulletin (6 pages) ,
- Supplementary manual (3 pages)
Table of Contents
Advertisement
Chapter 1
Product Overview
Table 1-3
Catalyst 6503-E Switch Features (continued)
Feature
Power supplies
1. PEMs are required for Catalyst 6503 and Catalyst 6503-E switches only.
Table 1-4
Table 1-4
Catalyst 6503-E Switch Specifications
Item
Environmental
Temperature, operating
Temperature, nonoperating
and storage
Thermal transition
Humidity (RH), ambient
(noncondensing) operating
OL-5781-08
Description
Supports one or two power supplies. The following power supplies are
•
supported:
PWR-950-AC (950 W AC-input power supply).
–
PWR-950-DC (950 W DC-input power supply).
–
PWR-1400-AC (1400 W AC-input power supply).
–
Installed power supplies can be of different wattage ratings. Installed
•
power supplies can be both AC-input, both DC-input, or one AC-input
and one DC-input. Power supplies can be configured in either redundant
or combined mode.
•
All Catalyst 6500 series AC-input power supplies require single-phase
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
Single power supplies are installed in the lower power supply bay. The
•
second power supply is installed in the upper power supply bay.
Supervisor Engine 2T requires a 1400 W power supply to operate.
•
For proper operation of the power supply OUTPUT FAIL LED,
Note
systems with single power supplies must be configured with a
minimum of one fan tray and one supervisor engine. Systems with
dual power supplies must have a minimum configuration of one fan
tray, one supervisor engine, and one additional module. Failure to
meet these minimum configuration requirements can cause a false
power supply output fail signal.
lists the environmental and physical specifications of the Catalyst 6503-E switch chassis.
Specification
Certified for operation: 32° to 104°F (0° to 40°C)
Designed and tested for operation: 32° to 131°F (0° to 55°C)
The Catalyst 6500 series switches are equipped with internal air
Note
temperature sensors that are triggered at 104°F (40°C) generating a
minor alarm and at 131°F (55°C) generating a major alarm.
Chassis unpackaged: –4° to 149°F (–20° to 65°C)
Chassis in protective shipping package: –40° to 158°F (–40° to 70°C)
0.5°C per minute (hot to cold)
0.33°C per minute (cold to hot)
5% to 90%
Catalyst 6500 Series Switches Installation Guide
Catalyst 6503-E Switch
1-11
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco 6503 - Catalyst Firewall Security Sys
Related Products for Cisco 6503 - Catalyst Firewall Security Sys
- Cisco 6503-E - Catalyst Chassis With Supervisor Engine 32 Switch
- Cisco 6504-E - Catalyst Chassis With Supervisor Engine 32 Switch
- Cisco 6506 - Catalyst Chassis Switch
- Cisco 6513 - Catalyst Switch
- Cisco Catalyst 6509
- Cisco Catalyst 6513-E
- Cisco Catalyst 6500-E Series
- Cisco CATALYST 6500 WS-X6066-SLB-S-K9