Using The Show Platform Forward Command - Cisco IE-3000-8TC Software Configuration Manual
Software configuration guide
Hide thumbs
Also See for IE-3000-8TC:
- Command reference manual (802 pages) ,
- Administration manual (496 pages) ,
- Message manual (98 pages)
Table of Contents
Advertisement
Using the show platform forward Command
Using the show platform forward Command
The output from the show platform forward privileged EXEC command provides some useful
information about the forwarding results if a packet entering an interface is sent through the system.
Depending upon the parameters entered about the packet, the output provides lookup table results and
port maps used to calculate forwarding destinations, bitmaps, and egress information.
Note
For more syntax and usage information for the show platform forward command, see the switch
command reference for this release.
Most of the information in the output from the command is useful mainly for technical support
personnel, who have access to detailed information about the switch application-specific integrated
circuits (ASICs). However, packet forwarding information can also be helpful in troubleshooting.
This is an example of the output from the show platform forward command on port 1 in VLAN 5 when
the packet entering that port is addressed to unknown MAC addresses. The packet should be flooded to
all other ports in VLAN 5.
Switch# show platform forward gigabitethernet1/1 vlan 5 1.1.1 2.2.2 ip 13.1.1.1 13.2.2.2
udp 10 20
Global Port Number:24, Asic Number:5
Src Real Vlan Id:5, Mapped Vlan Id:5
Ingress:
Lookup
InptACL
L2Local
Station Descriptor:02340000, DestIndex:0239, RewriteIndex:F005
==========================================
Egress:Asic 2, switch 1
Output Packets:
------------------------------------------
Packet 1
Lookup
OutptACL 50_0D020202_0D010101-00_40000014_000A0000
Port
Gi1/1
------------------------------------------
Packet 2
Lookup
OutptACL 50_0D020202_0D010101-00_40000014_000A0000
Port
Gi1/2
------------------------------------------
<output truncated>
------------------------------------------
Packet 10
Lookup
OutptACL 50_0D020202_0D010101-00_40000014_000A0000
Packet dropped due to failed DEJA_VU Check on Gi0/2
Cisco IE 3000 Switch Software Configuration Guide
39-16
Key-Used
40_0D020202_0D010101-00_40000014_000A0000
80_00050002_00020002-00_00000000_00000000
Key-Used
Vlan
SrcMac
0005 0001.0001.0001
0002.0002.0002
Key-Used
Vlan
SrcMac
0005 0001.0001.0001
0002.0002.0002
Key-Used
Index-Hit
01FFA
00C71
Index-Hit
01FFE
DstMac
Cos
Dscpv
Index-Hit
01FFE
DstMac
Cos
Dscpv
Index-Hit
01FFE
Chapter 39
Troubleshooting
A-Data
03000000
0000002B
A-Data
03000000
A-Data
03000000
A-Data
03000000
OL-13018-03
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
