Wi-Fi Protected Setup - Cisco Small Business WRP400 User Manual
Wireless-g broadband router with 2 phone ports
Hide thumbs
Also See for Small Business WRP400:
- Regulatory compliance and safety information manual (35 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (173 pages)
Table of Contents
Advertisement
Configuring Your Wireless Network
Wireless > Basic Wireless Settings
Cisco WRP400 User Guide
Wi-Fi Protected Setup
After you choose Wi-Fi Protected Setup for the Wireless Configuration, the
instructions, fields, and buttons appear on the screen. Three setup methods are
available.
Wi-Fi Protected Setup is available for your primary wireless network
NOTE
(SSID1) only. To configure your second wireless network (SSID2),
select Manual. If you are unable to configure the second wireless
network, contact your service provider for more information (these
settings may be controlled by your service provider).
-
Method #1: To configure a client device that has a Wi-Fi Protected
Setup button, click or press the Wi-Fi Protected Setup button on the
client device. Then click the button shown on the screen. After the client
device has been configured, click OK. Then refer to your client device or
its documentation for further instructions. Repeat for any additional
devices that you need to configure.
-
Method #2: To configure a client device that has a Wi-Fi Protected
Setup PIN number, enter the PIN number in the field on this screen. Click
Register. After the client device has been configured, click OK. Then
refer to your client device or its documentation for further instructions.
Repeat for any additional devices that you need to configure.
-
Method #3: If your client device asks for the PIN number of the WRP400,
enter the PIN number that is shown on the screen. This number also
appears on the label on the bottom of the WRP400. After the client
device has been configured, click OK. Then refer to your client device or
its documentation for further instructions. Repeat for any additional
devices that you need to configure.
6
54
Advertisement
Table of Contents
Troubleshooting
