Zone Mode Enhanced - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Fibre Channel Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

zone mode enhanced

To enable enhanced zoning for a VSAN, use the zone mode enhanced command. To disable this feature,

use the no form of the command.

Syntax Description

vsan vsan-id

Command Default

Command Modes

Configuration mode

Command History

4.0(0)N1(1a)

Usage Guidelines

Before using the zone mode enhanced command, verify that all switches in the fabric are capable of

working in enhanced zoning mode. If one or more switches are not capable of working in enhanced

zoning mode, the request to enable enhanced zoning mode is rejected.

When the zone mode enhanced vsan command completes successfully, the software automatically

starts a session, distributes the zoning database using the enhanced zoning data structures, applies the

configuration changes, and sends a release change authorization (RCA) to all switches in the fabric. All

switches in the fabric then enable enhanced zoning mode.

The following example shows how to enable enhanced zoning mode:

switch(config)# zone mode enhanced vsan 10

Related Commands

zone mode enhanced vsan vsan-id

no zone mode enhanced vsan vsan-id

Specifies the VSAN ID. The range is 1 to 4093.

Modification

This command was introduced.

Displays zone information.

Cisco Nexus 5000 Series Command Reference

zone mode enhanced