HP Brio ba300 Troubleshooting Manual page 13
Hp brio ba300, troubleshooting guide
Hide thumbs
Also See for Brio ba300:
- Technical reference manual (38 pages) ,
- Quick user manual (33 pages) ,
- Upgrade manual (24 pages)
Table of Contents
Advertisement
The Monitor Doesn't Work Properly
The PC's power indicator light works but the monitor remains blank
Have you checked that...
The monitor is switched ON (LED is on)
The monitor's power cord is correctly connected
The monitor (video) cable is correctly connected
The monitor's brightness and contrast settings
are correctly set
There is an image during boot but then the screen goes blank
Have you checked that...
The monitor settings in your PC are compatible
with your monitor
The picture breaks up, rolls, shudders or blinks
Have you checked that...
The monitor is correctly connected or set up
A Newly Installed Device Is Not Recognized
Have you checked that...
The device is installed or connected properly
If it is an external device, that it is switched on
How
Ö
Refer to the monitor manual for an explanation of the LED signals (green,
orange, or blinking)
Ö
Connect the power cord – ensure it is plugged into a working grounded
power outlet and into the monitor
Ö
Connect the monitor (video) cable – ensure it is properly connected to both
the PC and the monitor
Ö
Check the settings using the monitor's OSD (on-screen display) or using
controls on the front of the monitor
How
Ö
• Windows 98 & Windows 2000: Restart the PC. The PC opening screen is
displayed.
For Windows 98, when you hear a beep, press F8 and then start the PC
in safe mode.
For Windows 2000, when prompted, press F8 and then start the PC in
VGA mode. When the PC has started, double-click on the Display icon
in your PC's Control Panel, then click on the Settings button. Use
the sliding control to reset the resolution.
For other operating systems, refer to your operating system's
documentation.
How
Ö
• Check the video cable connections to the PC
• Check that there is not interference from a fluorescent light or fan
How
Ö
• Expansion cards:
Check that expansion cards are properly seated in their slots
• Internal devices:
Check any internal cables for bent pins and poor connection
• External devices:
Check any connections to external devices for bent pins or poor
connection
Ö
• Press the device's power button if there is one, and check that the
power cable is correctly connected
If You Have a Problem
13
Advertisement
Table of Contents
Troubleshooting
