Vlan (Vlan Database Mode) - Cisco 4500M Command Reference Manual
Command reference
Hide thumbs
Also See for 4500M:
- Software manual (608 pages) ,
- Hardware installation and maintenance manual (143 pages) ,
- Upgrade manual (24 pages)
Table of Contents
Advertisement
Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
vlan (VLAN Database mode)
To configure a specific VLAN, use the vlan command. To delete a VLAN, use the no form of this
command.
Syntax Description
vlan_id
are hops
backupcrf mode
bridge type
bridge_num
media type
mtu mtu-size
name vlan-name
parent parent-vlan-id
ring ring-number
said said-value
state
suspend
active
stp type type
tb-vlan1 tb-vlan1-id
tb-vlan2 tb-vlan2-id
78-16201-01
vlan vlan_id [are hops] [backupcrf mode] [bridge type | bridge-num] [media type] [mtu mtu-size]
[name vlan-name] [parent parent-vlan-id] [ring ring-number] [said said-value] [state
{suspend | active}] [ stp type type] [tb-vlan1 tb-vlan1-id] [tb-vlan2 tb-vlan2-id]
no vlan vlan
Number of the VLAN; valid values are from 1 to 4094.
(Optional) Specifies the maximum number of All Route Explorer hops for
this VLAN; valid values are from 0 to 13. Zero is assumed if no value is
specified.
(Optional) Enables or disables the backup CRF mode of the VLAN; valid
values are enable and disable.
(Optional) Specifies the bridging characteristics of the VLAN or
identification number of the bridge; valid type values are srb and srt.
(Optional) Valid bridge_num values are from 0 to 15.
(Optional) Specifies the media type of the VLAN; valid values are fast
ethernet, fd-net, fddi, trcrf, and trbrf.
(Optional) Specifies the maximum transmission unit (packet size, in bytes)
that the VLAN can use; valid values are from 576 to 18190.
(Optional) Defines a text string used as the name of the VLAN
(1to32characters).
(Optional) Specifies the ID number of the parent VLAN of FDDI or Token
Ring-type VLANs; valid values are from 2 to 1001.
(Optional) Specifies the ring number of FDDI or Token Ring-type VLANs;
valid values are from 2 to 1001.
(Optional) Specifies the security association identifier; valid values are from
1 to 4294967294.
(Optional) Specifies the state of the VLAN.
Specifies that the state of the VLAN is suspended. VLANs in the suspended
state do not pass packets.
Specifies that the state of the VLAN is active.
(Optional) Specifies the STP type; valid values are ieee, ibm, and auto.
(Optional) Specifies the ID number of the first translational VLAN for this
VLAN; valid values are from 2 to 1001. Zero is assumed if no value is
specified.
(Optional) Specifies the ID number of the second translational VLAN for
this VLAN; valid values are from 2 to 1001. Zero is assumed if no value is
specified.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
vlan (VLAN Database mode)
2-495
Advertisement
Table of Contents
