User Interface For Arp; User Interface For Ping; User Interface For Snmp; User Interface For Hsrp - Cisco 3845 - Security Bundle Router Software Manual
Software configuration guide
Hide thumbs
Also See for 3845 - Security Bundle Router:
- Manual (94 pages) ,
- Quick start manual (38 pages) ,
- Hardware installation manual (418 pages)
Table of Contents
Advertisement
Chapter 29
Configuring IP Unicast Routing
User Interface for ARP
Beginning in privileged EXEC mode, follow these steps to configure VRF-aware services for ARP. For
complete syntax and usage information for the commands, refer to the switch command reference for
this release and the Cisco IOS Switching Services Command Reference, Release 12.2.
Command
show ip arp vrf vrf-name
User Interface for PING
Beginning in privileged EXEC mode, follow these steps to configure VRF-aware services for ping. For
complete syntax and usage information for the commands, refer to the switch command reference for
this release and the Cisco IOS Switching Services Command Reference, Release 12.2.
Command
ping vrf vrf-name ip-host
User Interface for SNMP
Beginning in privileged EXEC mode, follow these steps to configure VRF-aware services for SNMP. For
complete syntax and usage information for the commands, refer to the switch command reference for
this release and the Cisco IOS Switching Services Command Reference, Release 12.2.
Command
Step 1
configure terminal
Step 2
snmp-server trap authentication vrf
Step 3
snmp-server engineID remote <host>
vrf <vpn instance> <engine-id string>
Step 4
snmp-server host <host> vrf <vpn
instance> traps <community>
Step 5
snmp-server host <host> vrf <vpn
instance> informs <community>
Step 6
snmp-server user <user> <group>
remote <host> vrf <vpn instance>
<security model>
Step 7
end
User Interface for HSRP
HSRP support for VRFs ensures that HSRP virtual IP addresses are added to the correct IP routing table.
Beginning in privileged EXEC mode, follow these steps to configure VRF-aware services for HSRP. For
complete syntax and usage information for the commands, refer to the switch command reference for
this release and the Cisco IOS Switching Services Command Reference, Release 12.2.
OL-23400-01
Purpose
Display the ARP table in the specified VRF.
Purpose
Display the ARP table in the specified VRF.
Purpose
Enter global configuration mode.
Enable SNMP traps for packets on a VRF.
Configure a name for the remote SNMP engine on a switch.
Specify the recipient of an SNMP trap operation and specify the VRF
table to be used for sending SNMP traps.
Specify the recipient of an SNMP inform operation and specify the VRF
table to be used for sending SNMP informs.
Add a user to an SNMP group for a remote host on a VRF for SNMP
access.
Return to privileged EXEC mode.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Configuring Multi-VRF CE
29-85
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
