Cisco 3845 - Security Bundle Router Software Manual page 835
Software configuration guide
Hide thumbs
Also See for 3845 - Security Bundle Router:
- Manual (94 pages) ,
- Quick start manual (38 pages) ,
- Hardware installation manual (418 pages)
Table of Contents
Advertisement
Chapter 34
Configuring MPLS, MPLS VPN, MPLS OAM, and EoMPLS
Command
Step 6
secondary-frequency {connection-loss |
timeout} frequency
Step 7
tag text
Step 8
threshold milliseconds
Step 9
timeout milliseconds
Step 10
ttl time-to-live
Step 11
exit
Step 12
ip sla schedule operation-number [ageout
seconds] [life {forever | seconds}] [recurring]
[start-time {hh:mm {:ss} [month day | day month]
| pending | now | after hh:mm:ss}]
Step 13
end
Step 14
show ip sla configuration [operation-number]
Step 15
copy running-config startup-config
Step 16
show ip sla statistics [operation-number]
OL-23400-01
Purpose
(Optional) Set the secondary frequency (faster measurement
frequency) to which an IP SLAs operation should change when
a reaction condition occurs. The frequency range is 1 to
604800.
(Optional) Create a user-specified identifier for an IP SLAs
operation.
(Optional) Specify the rising threshold (hysteresis) that
generates a reaction event and stores history information for an
IP SLAs operation. The range is 0 to 2147483647; the default
is 5000 ms.
(Optional) Specify the amount of time that the IP SLAs
operation waits for a response from its request packet. The
range is 0 to 604800000; the default value is 5000 ms.
(Optional) Specify the maximum hop count for an IP SLAs
echo request packet. The range is 1 to 255.
Return to global configuration mode.
Schedule the time parameters for MPLS LSP monitoring.
operation-number—Enter the IP SLAs operation number.
•
(Optional) ageout seconds—Enter the number of seconds
•
to keep the operation in memory when it is not actively
collecting information. The default is 0 seconds (never
ages out). The range is 0 to 2073600 seconds.
(Optional) life—Set the operation to run indefinitely
•
(forever) or for a specific number of seconds. The range is
from 0 to 2147483647. The default is 3600 seconds (1
hour)
(Optional) recurring—Set the probe to be automatically
•
scheduled every day.
(Optional) start-time—Enter the time for the operation to
•
begin collecting information:
–
To start at a specific time, enter the hour, minute,
second (in 24-hour notation) and day of the month. If
no month is entered, the default is the current month.
Enter pending to select no information being collected
–
until a start time is selected.
Enter now to start the operation immediately.
–
Enter after hh:mm:ss to indicate that the operation
–
should start after the entered time has elapsed.
Return to privileged EXEC mode.
Show the configured LSP monitoring operations.
(Optional) Save your entries in the configuration file.
Display the statistics of a scheduled LSP monitoring operation.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Configuring MPLS OAM and IP SLAs MPLS
34-55
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
