Cisco 7604 Configuration Manual page 292
Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli
Hide thumbs
Also See for 7604:
- Configuration manual (1011 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Configuring Failover
Table 14-5
Field
Stateful Failover Logical
Update Statistics
Link
Stateful Obj
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
14-38
Show Failover Display Description (continued)
Options
The following fields relate to the Stateful Failover feature. If the Link
field shows an interface name, the Stateful Failover statistics are shown.
•
•
•
•
•
For each field type, the following statistics are used. They are counters
for the number of state information packets sent between the two units;
the fields do not necessarily show active connections through the unit.
•
•
•
•
General
Sum of all stateful objects.
sys cmd
Logical update system commands; for example, LOGIN and Stay
Alive.
up time
Up time, which the active unit passes to the standby unit.
RPC services
Remote Procedure Call connection information.
TCP conn
TCP connection information.
UDP conn
Dynamic UDP connection information.
ARP tbl
Dynamic ARP table information.
L2BRIDGE tbl
Layer 2 bridge table information (transparent firewall mode only).
Xlate_Timeout
Indicates connection translation timeout information.
VPN IKE upd
IKE connection information.
VPN IPSEC upd
IPSec connection information.
VPN CTCP upd
cTCP tunnel connection information.
VPN SDI upd
SDI AAA connection information.
VPN DHCP upd
Tunneled DHCP connection information.
GTP PDP
GTP PDP update information. This information appears only if inspect
GTP is enabled.
GTP PDPMCB
GTP PDPMCB update information. This information appears only if
inspect GTP is enabled.
interface_name—The interface used for the Stateful Failover link.
Unconfigured—You are not using Stateful Failover.
up—The interface is up and functioning.
down—The interface is either administratively shutdown or is
physically down.
failed—The interface has failed and is not passing stateful data.
xmit—Number of transmitted packets to the other unit
xerr—Number of errors that occurred while transmitting packets to
the other unit
rcv—Number of received packets
rerr—Number of errors that occurred while receiving packets from
the other unit
Chapter 14
Configuring Failover
OL-20748-01
- Quick Links:
- C H a P T E...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
