Reloading The Fwsm; Performing Password Recovery; Clearing The Application Partition Passwords And Aaa Settings - Cisco 7604 Configuration Manual
Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli
Hide thumbs
Also See for 7604:
- Configuration manual (1011 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Reloading the FWSM
hostname(config)# no service-policy ICMP-POLICY
Reloading the FWSM
In multiple mode, you can only reload from the system execution space. To reload the FWSM, enter the
following command:
hostname# reload
Performing Password Recovery
If you forget passwords, or you create a lockout situation because of AAA settings, the following
sections describe how to recover:
•
•
Clearing the Application Partition Passwords and AAA Settings
If you forget the login and enable passwords, or you create a lockout situation because of AAA settings,
you can reset the passwords and portions of AAA configuration to the default values. You must log in to
the maintenance partition to perform this procedure:
Set the application boot partition by entering the following command at the switch prompt:
Step 1
Router# set boot device cf:n [mod_num]
The default boot partition for the module is cf:4. The maintenance partition is cf:1. Later in this
procedure, you specify the boot partition for which you want to clear passwords.
To boot the FWSM in to the maintenance partition, enter the following command:
Step 2
Router# hw-module module mod_num reset cf:1
To session in to the FWSM, enter the following command:
Step 3
Router# session slot mod_num processor 1
To log in to the maintenance partition as root, enter the following command:
Step 4
Login: root
Enter the password at the prompt:
Step 5
Password: password
By default, the password is "cisco."
Step 6
To clear the login and enable passwords, as well as the aaa authentication console and aaa
authorization command commands, enter the following command:
root@localhost# clear passwd cf:{4 | 5}
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
26-6
Clearing the Application Partition Passwords and AAA Settings, page 26-6
Resetting the Maintenance Partition Passwords, page 26-7
Chapter 26
Troubleshooting the Firewall Services Module
OL-20748-01
- Quick Links:
- C H a P T E...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
