Primary Fwsm Configuration (Example 7 - Cisco 7604 Configuration Manual

Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli

Hide thumbs Also See for 7604:

Table of Contents

Sample Configurations

VLANs 200-202

See the following sections for the configurations for this scenario:

Primary FWSM Configuration (Example 7)

The following sections include the configuration for the primary FWSM:

System Configuration (Primary Unit—Example 7)

You must first enable multiple context mode using the mode multiple command. Then enter the

activation key to allow more than two contexts using the activation-key command. The mode and the

activation key are not stored in the configuration file, even though they do endure reboots. If you view

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

Active Switch

Primary FWSM Configuration (Example 7), page B-23

Secondary FWSM System Configuration (Example 7), page B-26

Switch Configuration (Example 7), page B-26

System Configuration (Primary Unit—Example 7), page B-23

Context A Configuration (Primary Unit—Example 7), page B-24

Context B Configuration (Primary Unit—Example 7), page B-25

Context C Configuration (Primary Unit—Example 7), page B-25

Standby Switch

Failover Links:

VLANs 10 and 11

Failover Example Configurations

Show Quick Links

Table of Contents