Enabling Vtp Pruning - Cisco 7604 Configuration Manual
Ios software configuration guide
Hide thumbs
Also See for 7604:
- Configuration manual (742 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Chapter 13
Configuring VTP
You can enter the VTP global parameters in either global configuration mode or in EXEC mode.
Note
Configuring a VTP Password
To configure the VTP global parameters, perform this task:
Command
Router(config)# vtp password password_string
Router(config)# no vtp password
This example shows one way to configure a VTP password in global configuration mode:
Router# configure terminal
Router(config)# vtp password WATER
Setting device VLAN database password to WATER.
Router#
This example shows how to configure a VTP password in EXEC mode:
Router# vtp password WATER
Setting device VLAN database password to WATER.
Router#
The password is not stored in the running-config file.
Note
Enabling VTP Pruning
To enable VTP pruning in the management domain, perform this task:
Command
Step 1
Router(config)# vtp pruning
Router(config)# no vtp pruning
Step 2
Router# show vtp status
This example shows one way to enable VTP pruning in the management domain:
Router# configure terminal
Router(config)# vtp pruning
Pruning switched ON
This example shows how to enable VTP pruning in the management domain with any release:
Router# vtp pruning
Pruning switched ON
This example shows how to verify the configuration:
Router# show vtp status | include Pruning
VTP Pruning Mode: Enabled
Router#
OL-4266-08
Purpose
Sets a password, which can be from 8 to 64 characters long,
for the VTP domain.
Clears the password.
Purpose
Enables VTP pruning in the management domain.
Disables VTP pruning in the management domain.
Verifies the configuration.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
Configuring VTP
13-7
- Quick Links:
- Supported Hardware and Software
Hide quick links:
Advertisement
Chapters
Table of Contents
