Using Cisco IOS XE Software
12
asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin
13 -rw-
Example 2: Copying a Startup Configuration File to USB Flash Disk
Router# dir usb0:
Directory of usb0:/
43261
asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin
255497216 bytes total (40190464 bytes free)
Router# copy nvram:startup-config usb0:
Destination filename [startup-config]?
3172 bytes copied in 0.214 secs (14822 bytes/sec)
Router# dir usb0:
Directory of usb0:/
43261
asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin
43262 -rwx
255497216 bytes total (40186880 bytes free)
Example 3: Copying a Startup Configuration File to a TFTP Server
Router# copy bootflash:startup-config tftp:
Address or name of remote host []? 172.17.16.81
Destination filename [pe24_asr-1002-confg]? /auto/tftp-users/user/startup-config
!!
3517 bytes copied in 0.122 secs (28828 bytes/sec)
For more detailed information on managing configuration files, see the Managing Configuration Files
section in the Cisco IOS XE Configuration Fundamentals Configuration Guide.
Filtering the Output of the show and more Commands
You can search and filter the output of show and more commands. This functionality is useful if you
need to sort through large amounts of output or if you want to exclude output that you need not see.
To use this functionality, enter a show or more command followed by the "pipe" character ( | ); one of
the keywords begin, include, or exclude; and a regular expression on which you want to search or filter
(the expression is case sensitive):
-rw-
208904396
May 28 2008 16:17:34 -07:00
7516
Jul 2 2008 15:01:39 -07:00
-rwx
208904396
May 27 2008 14:10:20 -07:00
-rwx
208904396
May 27 2008 14:10:20 -07:00
3172
Jul 2 2008 15:40:45 -07:00
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Filtering the Output of the show and more Commands
startup-config
startup-config
13