Table of Contents
Advertisement
Remote Software
Setup Overview
Setup Screen Overview
Camera Setup
Camera Setup
PanTilt Setup
Sequence Setup
______________________________________________________________________________________________
70
Ensure the tree is expanded on the left menu to display the Camera, Record
and Sensor Setup options. Most of the setup options are the same in both the
remote software and in the E480 system. Click APPLY after changing any
settings.
The Camera Setup display allows the user to define camera names, power on
and off cameras and define specific cameras as hidden.
Title – Enter camera name (up to seven characters).
Enable – ON/OFF [Enable individual cameras].
Hidden – ON/OFF – On will hide the camera from logged out users.
The PanTilt (PTZ) Setup display allows the user to define the appropriate
protocol for connected cameras with PTZ capabilities. Since setup varies
between different PTZ cameras, refer to the instructions supplied by the
camera's manufacturer to complete setup.
ID – 1 ~ 255 [Set the PTZ ID]
PROTOCOL – Select a PTZ protocol
The Sequence Setup display allows the user to set the parameters for:
Page Dwell Time – 1 ~ 100 seconds [Set the sequence interval time for full
screen on Main Display].
Camera Dwell Time – 1 ~ 100 seconds [Set the sequence interval time for
individual cameras on Main Display].
Channel – 1 ~ 4 / All [Select cameras to display in Main Display].
Hide quick links:
Advertisement
Table of Contents
