Configuring EIGRP
This is an example of output from the show ip eigrp interface privileged EXEC command:
Switch# show ip eigrp interface
IP EIGRP interfaces for process 109
Xmit Queue
Interface
Gi0/1
Gi0/3
Gi0/4
Gi0/5
This is an example of output from the show ip eigrp neighbors privileged EXEC command:
Switch# show ip eigrp neighbors
IP-EIGRP Neighbors for process 77
Address
160.89.81.28
160.89.80.28
160.89.80.31
This is an example of output from the show ip eigrp topology privileged EXEC command:
Switch# show ip eigrp topology
IP-EIGRP Topology Table for process 77
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
P 160.89.90.0 255.255.255.0, 2 successors, FD is 0
P 160.89.81.0 255.255.255.0, 1 successors, FD is 307200
This is an example of output from the show ip eigrp traffic privileged EXEC command:
Switch# show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 19812/19821
Updates sent/received: 1/1
Queries sent/received: 0/0
Replies sent/received: 0/0
Acks sent/received: 1/0
Input queue high water mark 1, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
Catalyst 3550 Multilayer Switch Software Configuration Guide
22-52
Mean
Pacing Time
Peers
Un/Reliable
0
0/0
1
0/0
1
0/0
1
0/0
Interface
GigabitEthernet 0/1
GigabitEthernet 0/3
GigabitEthernet 0/4
r - Reply status
via 160.89.80.28 (46251776/46226176), GigabitEthernet0/1
via 160.89.81.28 (46251776/46226176), GigabitEthernet0/3
via 160.89.80.31 (46277376/46251776), GigabitEthernet0/1
via Connected, GigabitEthernet0/3
via 160.89.81.28 (307200/281600), GigabitEthernet0/3
via 160.89.80.28 (307200/281600), GigabitEthernet0/1
via 160.89.80.31 (332800/307200), GigabitEthernet0/1
Multicast
Pending
SRTT
Un/Reliable
Flow Timer
0
11/434
337
0/10
10
1/63
330
0/16
Hold Uptime
(secs)
(h:m:s)
13
0:00:41
14
0:02:01
12
0:02:02
Chapter 22
Configuring IP Unicast Routing
Routes
0
0
0
0
103
0
0
0
Q
Seq
Type
Count
Num
0
11
0
10
0
4
78-11194-03