Cisco WS-C3550-12G Software Configuration Manual page 85

Multilayer switch

Hide thumbs Also See for WS-C3550-12G:

Table of Contents

Getting Started with CMS

Table 3-18 Device Popup Menu of a Candidate-Switch Icon (When the Candidate Switch Has an IP Address)

Popup Menu Option

Add to Cluster

Add a candidate to a cluster.

Device Manager

Launch Device Manager for a switch.

Display information about the device and port on either end of the link and the state of the link.

1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the

2. Available from a cluster member switch but not from the command switch.

Table 3-19 Device Popup Menu of a Candidate-Switch Icon (When the Candidate Switch Does Not Have an IP Address)

Popup Menu Option

Add to Cluster

Add a candidate to a cluster.

Display information about the device and port on either end of the link and the state of the link.

1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the

Table 3-20 Device Popup Menu of a Neighboring-Device Icon

Popup Menu Option

Device Manager

Access the web management interface of the device.

Disqualification Code

Display the reason why the device could not join the cluster.

Display information about the device and port on either end of the link and the state of the link.

1. Available from a cluster member switch but not from the command switch.

This option is available on Cisco access points, but not on Cisco IP phones, hubs, routers

and on unknown devices such as some Cisco devices and third-party devices.

Catalyst 3550 Multilayer Switch Software Configuration Guide

Menus and Toolbar

"Access Modes in CMS" section on

Show Quick Links

Table of Contents

Troubleshooting

Catalyst 3550