Table of Contents
Advertisement
Configuring VMPS and Dynamic Port VLAN Membership on the Switch
This example shows how to specify the VMPS server, verify the VMPS server specification, assign the
dynamic ports, and verify the configuration:
Console> (enable) show vmps server
VMPS domain server VMPS Status
---------------------------------------
192.0.0.6
192.0.0.1
192.0.0.9
Console> (enable) set port membership 3/1-3 dynamic
Ports 3/1-3 vlan assignment set to dynamic.
Spantree port fast start option enabled for ports 3/1-3.
Console> (enable) set port membership 1/2 dynamic
Trunking port 1/2 vlan assignment cannot be set to dynamic.
Console> (enable) set port membership 2/1 dynamic
ATM LANE port 2/1 vlan assignment can not be set to dynamic.
Console> show port
Port
1/1
1/2
2/1
3/1
3/2
3/3
Console> (enable)
The show port command displays dyn- under the Vlan column of the display when it has not yet been
Note
assigned a VLAN for a port.
Administering and Monitoring VMPS
To show information about the MAC address-to-VLAN mappings, perform one of these tasks in
privileged mode:
Task
Show the VLAN to which a MAC address is
mapped in the database.
Show the MAC addresses that are mapped to a
VLAN in the database.
Show the ports belonging to a restricted VLAN.
To show the VMPS statistics, perform this task in privileged mode:
Task
Show the VMPS statistics.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
19-6
primary
Name
Status
Vlan
connect
dyn-3
connect
trunk
connect
trunk
connect
dyn-5
connect
dyn-5
connect
dyn-5
Chapter 19
Configuring Dynamic Port VLAN Membership with VMPS
Level
Duplex
normal
full
normal
half
normal
full
normal
half
normal
half
normal
half
Command
show vmps mac [mac_address]
show vmps vlan [vlan_name]
show vmps vlanports [vlan_name]
Command
show vmps statistics
Speed
Type
100
100 BASE-TX
100
100 BASE-TX
155
OC3 MMF ATM
10
10 BASE-T
10
10 BASE-T
10
10 BASE-T
OL-8978-04
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
