Additional Cisco Ios Cli Features; About Embedded Ciscoview; Installing And Configuring Embedded Ciscoview - Cisco Catalyst 8540 MSR Configuration Manual
Atm switch router software configuration guide
Hide thumbs
Also See for Catalyst 8540 MSR:
Table of Contents
Advertisement
Chapter 2
Understanding the User Interface
Additional Cisco IOS CLI Features
Because the ATM switch router's operating system is based on Cisco IOS software, its interface provides
a number of features that help you use the CLI with greater flexibility, ease, and power. These features
includes the following:
•
•
•
For information on using these and other features of Cisco IOS software, refer to the Configuration
Fundamentals Configuration Guide.
About Embedded CiscoView
Embedded CiscoView network management system provides a web-based interface for the Catalyst
8540, Catalyst 8510 and LightStream 1010. Embedded CiscoView uses HTTP and SNMP to provide
graphical representations of the system and provide GUI-based management and configuration facilities.
You can download the Java Archive (JAR) files for Embedded CiscoView at the following URL:
http://www.cisco.com/kobayashi/sw-center/netmgmt/ciscoview/embed-cview-planner.shtml
Installing and Configuring Embedded CiscoView
To install and configure Embedded CiscoView on the Catalyst 8540, Catalyst 8510 and LightStream
1010, perform the following steps:
Command
Step 1
Switch# dir slotn:
Step 2
Switch# delete slotn:cv/*
Step 3
Switch# squeeze slotn:
Step 4
Switch# archive tar /xtract tftp://
ip address of tftp server/
ciscoview.tar slotn:cv
Step 5
Switch# dir slotn:
Step 6
Switch# configure terminal
Switch(config)#
OL-7396-01
Context-sensitive help—allows you to obtain a list of commands available for each command mode
or a list of available options for a specific command by entering a question mark (?).
Command history—records a history of commands, allowing you to recall previously entered long
or complex commands.
Editing—provides the ability to move around the command line, cut and paste entries, control
scrolling, create keyboard macros, and so on.
Purpose
Shows the contents of the CiscoView directory.
If you are installing Embedded CiscoView for the first time, or
if the CiscoView directory is empty, skip to
Removes existing files from the CiscoView directory.
Recovers the space in the file system.
Extracts the CiscoView files from the tar file on the TFTP
server to the CiscoView directory.
Displays the file in Flash memory.
Repeat
Step 1
and
Step 5
for the file system (sby-slotn:) on the
standby processor.
Enters global configuration mode.
ATM Switch Router Software Configuration Guide
Additional Cisco IOS CLI Features
Step
4.
2-17
Advertisement
Table of Contents
Troubleshooting
