3. Connect the hard disk drive backplane power cables to the connector in front of
4. Install the screw into the safety cover.
5. Install the SAS riser-card assembly (see "Installing the SAS riser-card and
6. Install the server cover (see "Installing the cover" on page 178).
7. Slide the server into the rack.
8. Reconnect the external cables; then, reconnect the power cords and turn on the
252
IBM System x3650 M3 Types 4255, 7945, and 7949: Problem Determination and Service Guide
the safety cover.
controller assembly" on page 198).
peripheral devices and the server.