hit counter script

Colour And Lighting Settings - Nokia N78 User Manual

Hide thumbs Also See for N78:
Table of Contents

Advertisement

Add to album
— Save the image to an album in
Photos.
Record location
— To add GPS location coordinates
to each image file, select On. Receiving a GPS signal
may take time or the signal may not be available.
"Location information", p. 63.
Show captured image
captured image after it is taken or to continue image
capturing immediately.
Default image name
the captured images.
Extended digital zoom
the zoom increments to be smooth and continuous
between digital and extended digital zoom,
(paused)
allows the zoom increments to pause at the
digital and extended digital step point, and
a limited amount of zoom while retaining the image
resolution. Use the extended zoom only when getting
closer to the subject is more important than the final
image quality. The overall quality of a digitally zoomed
image is always lower than that of an unzoomed
image.
Capture tone
— Set the tone that sounds when you
capture an image.
Memory in use
— Select where to store your images.
Restore camera settings
settings to default values.
© 2009 Nokia. All rights reserved.
— Select whether to view the
— Define the default name for
On (continuous)
On
Off
— Restore the camera

Colour and lighting settings

In the active toolbar, select from the following:
Flash mode
See
flash mode.
Colour tone
White balance
condition. This allows the camera to reproduce colours
more accurately.
Exposure compensation
are shooting a dark subject against a very light
allows
background, such as snow, adjust the exposure to +1
or +2 to compensate for the background brightness.
For light subjects against a dark background, use -1 or
-2.
allows
Sharpness
of the image.
Contrast
between the lightest and darkest parts of the image.
Light sensitivity
light sensitivity in low light conditions to avoid too
dark images.
The screen display changes to match the settings you
make.
The available settings vary depending on the selected
camera.
( ) (image only) — Select the desired
( ) — Select a colour effect.
( ) — Select the current lighting
( ) (image only) — If you
( ) (image only) — Adjust the sharpness
( ) (image only) — Adjust the difference
( ) (image only) — Increase the
69

Advertisement

Table of Contents
loading

Table of Contents