Table of Contents
Advertisement
AUSM-8T1/E1
AUSM-8T1/E1
The AUSM-8T1/E1 is a multipurpose card that supports up to 8-T1 or E1 ports and can be used for the
following four MGX 8220 applications:
1.
2.
3.
4.
The following back cards are compatible with the AUSM-8T1/E1:
•
•
•
The 4-port AUSM back cards and IMATM backcards are not compatible with the AUSM-8T1/E1.
The AUSM-8T1/E1 has the following features:
•
•
•
•
•
•
Cisco MGX 8220 Installation and Configuration
4-20
ATM Inverse Multiplexing nxT1 and nxE1 trunking
This application supports inverse multiplexed trunks between MGX 8220 shelves. In turn, this
supports inverse multiplexed trunks between BPX 8620 and the IGX network nodes via MGX 8220
shelves and remote MGX 8220 shelves.
ATM UNI card with eight ports to provide a high port density service module
With all ten available slots installed with the AUSM-8T1/E1 cards, a single MGX 8220 shelf could
support up to 80 individual T1/E1 lines.
In UNI/NNI mode each card can support 1000 data connections and 16 management connections.
In STI format, each card can support 100 virtual paths.
UNI/NNI access to CPE and other Networks
This application allows access over an UNI to IMA-based CPE and over an NNI to another ATM
network.
NNI/NNI access to CPEs
This application
upports ATM ports over single T1/E1 line and IMA ports over multiple
s
T1/E1lines (connected to IMA based CPE).
RJ48-T1 back card for T1
RJ48-E1 back card for E1
SMB-E1 back card for E1
Statistics collection.
Support for VP connections.
Support for BERT functionality with loopback pattern generation/verification on individual T1/E1
lines.
1:N redundancy with active and standby AUSM-8T1/E1 modules.
Auto-card restore.
Compatible with SRM-3T3.
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Advertisement
Table of Contents
Troubleshooting
