Table of Contents
Advertisement
Configuring Networking
Configuring IPv6
STEP 3
STEP 4
Configuring IPv6
Cisco RV110W Administration Guide
LAN:IPv6, WAN:IPv6
LAN:IPv4+IPv6,
WAN:IPv4
LAN:IPv4+IPV6,
WAN:IPv4+IPv6
LAN:IPv4, WAN:IPv6
(Optional) If you are using 6to4 tunneling, which allows IPv6 packets to be
transmitted over an IPv4 network, do the following:
a. Click Show Static 6to4 DNS Entry.
b. In the Domain and IP fields, enter up to five domain-to-IP mappings.
The 6to4 tunneling feature is typically used when a site or end user wants to
connect to the IPv6 Internet using the existing IPv4 network.
Click Save.
Internet Protocol version 6 (IPv6) is a version of the Internet Protocol (IP) intended
to succeed Internet Protocol version 4 (IPv4). Configuring WAN properties for an
IPv6 network depends on the type of internet connection that you have.
Configuring the WAN for an IPv6 Network
You can configure the Cisco RV110W to be a DHCPv6 client of the ISP for this
WAN or to use a static IPv6 address provided by the ISP.
Setting the IP Mode
To configure IPv6 WAN settings on your Cisco RV110W, you must first set the IP
mode to LAN:IPv6, WAN:IPv6 or LAN:IPv4+IPv6, WAN:IPv4+IPv6.
See
Configuring the IP Mode
Choose this option to use IPv6 in the LAN and WAN
ports.
Choose this option to use IPv4 and IPv6 in the LAN
ports and IPv4 in the WAN ports.
Choose this option to use IPv4 and IPv6 in both the
LAN and WAN ports.
Choose this option to use IPv4 in the LAN and IPv6
in the WAN ports.
for more information.
2
45
Hide quick links:
Advertisement
Table of Contents
