Table of Contents
Advertisement
Two-Way Calling
During an external call, press the delete/int/conf button, and use the touch-tone
1.
pad to enter the handset number to put an external line on hold. The user may
then auto intercom with the paged handset.
NOTE: Both intercom users may speak privately. The external caller
will not hear the intercom conversation.
When finished, press the END button to end the intercom call, return to the talk
.
mode, and resume your original telephone conversation.
Three-Way Calling
During an external call, press the delete/int/conf button. The screen displays LINE
1.
ON HOLD EXTENSION?.
.
Use the touch-tone pad to select Handset # to enter into auto intercom call with
paged handset.
When the receiving handset connects, press the delete/int/conf button on the
.
originating handset to conference with the receiving handset and the external
caller. The screen displays CONFERENCE on the originating and receiving
handsets.
NOTE: A handset can enter conference mode directly by pressing
TALK/SPEAKER on the second handset during a call.
Transferring External Calls to Other Handsets
During an external call, you may transfer the external call to another handset.
Press the delete/int/conf button on the originating handset to put an external call
1.
on hold, and enter the paged handset number.
.
A long beep is heard and then the two handsets are immediately connected.
Receiving handset shall immediately come into the auto intercom mode that both
"microphone" and "speaker" of this receiving handset shall be enabled such that
the user of receiving handset can freely talk and listen to the conversation.
When the receiving handset connects, press the END button on the originating
.
handset to transfer the call.
9
Advertisement
Table of Contents
