Table of Contents
Advertisement
Chapter 3
Maintaining the Server
Table 3-2
Rear Panel LEDs, Definitions of States
LED Name
Power supply status LED
Power supply fault LED
10/100 Ethernet link speed
10/100 Ethernet link status
10-Gb Ethernet link speed
10-Gb Ethernet link status
1-Gb Ethernet link speed
1-Gb Ethernet link status
Identification
OL-24342-01z
State
•
Green, steady—The power supply is operating normally and supplying AC power
to the server.
•
Green, blinking—The power supply is off and in cold-redundancy mode.
•
Off—The power supply is operating normally.
Amber, blinking—An event warning threshold has been reached, but the power
•
supply continues to operate.
•
Amber, steady—A critical fault threshold has been reached, causing the power
supply to shut down.
•
Off—link speed is 10 Mbps.
Green—link speed is 100 Mbps.
•
Off—No link is present.
•
Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
•
Off—link speed is 10 Mbps.
•
Green—link speed is 10 Gbps.
•
Off—No link is present.
Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
Off—link speed is 10 Mbps.
•
Amber—link speed is 100 Mbps.
•
•
Green—link speed is 1 Gbps.
•
Off—No link is present.
•
Green—Link is active.
Green, blinking—Traffic is present on the active link.
•
Off—The Identification LED is not in use.
•
Blue—The Identification LED is activated.
•
Cisco UCS C260 Server Installation and Service Guide
Status LEDs and Buttons
3-5
Advertisement
Table of Contents
