Table of Contents
Advertisement
Chapter 3
Setup > MAC Address Clone
Every computere hardware device, including the network
adapter of your computer has a unique code called a MAC
address. Some Internet Service Providers (ISPs) require you
to register this address with them in order to access the
Internet. If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature.
Setup > MAC Address Clone
MAC Address Clone
Enabled/Disabled
To enable MAC Address cloning,
select Enabled.
User Defined Entry
Enter the MAC Address registered
with your ISP here.
Clone Your PC's MAC
Clicking this button will clone the
MAC address of the computer you are using.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Simultaneous Dual-N Band Wireless Router
Advanced Configuration
Setup > Advanced Routing
This screen is used to set up the Router's advanced
functions. Operating Mode allows you to select the
type(s) of advanced functions you use. Dynamic Routing
automatically adjusts how packets travel on your network.
Static Routing sets up a fixed route to another network
destination.
Setup > Advanced Routing
Advanced Routing
NAT
If this Router is hosting your network's connection
to the Internet, select Enabled. When NAT is disabled,
Dynamic Routing (RIP) will be available as an option.
Dynamic Routing (RIP)
This feature enables the Router to
automatically adjust to physical changes in the network's
layout and exchange routing tables with the other
router(s). The Router determines the network packets'
route based on the fewest number of hops between the
source and the destination. This feature is Disabled by
default.
Static Routing
Select Route Entry number
between the Router and another network, select a
number from the drop-down list. (A static route is a pre-
determined pathway that network information must travel
to reach a specific host or network.) Enter the information
described below to set up a new static route. (Click Delete
This Entry to delete a static route.)
Enter Route Name
Enter a name for the Route here,
using a maximum of 25 alphanumeric characters.
Destination LAN IP
The Destination LAN IP is the address
of the remote network or host to which you want to assign
a static route.
Subnet Mask
The Subnet Mask determines which
portion of a Destination LAN IP address is the network
portion, and which portion is the host portion.
To set up a static route
11
Hide quick links:
Advertisement
Table of Contents
