Table of Contents
Advertisement
Client ID—Enter the Client ID, if applicable as a filter condition. This field
accepts ASCII or hexadecimal strings. To enter a hexadecimal string, add 0x
before the string.
Host Name—Enter the Host Name, if applicable as a filter condition.
Domain Name—If there is a match, the DHCP server will assign this Domain
Name to the host.
IP Address—If there is a match, the DHCP server will assign this IP Address
to the host.
4
Click Add Entry to add a new entry to the table. Click Save Settings to apply
your changes.
5
Click Back to LAN Setup to return to the Local Network screen.
6
Configure the following parameters:
Starting IP Address—Enter a value for the DHCP server to start with when
issuing IP addresses. Because the Gateway's default IP address is 192.168.1.1,
the Starting IP Address must be 192.168.1.2 or greater, but smaller than
192.168.1.253. The default is 192.168.1.64.
Ending IP Address—Specify the final IP address of the range available for
assignment. The default is 192.168.1.253.
Client Lease Time—The Client Lease Time is the amount of time a network
device will be allowed connection to the Gateway with its current dynamic IP
address. Enter the number of minutes that the device will be "leased" this
dynamic IP address. After the time is up, the device will be automatically
assigned a new dynamic IP address. The default is 1440 minutes.
7
Click the Advanced View link and configure the available options:
DNS Proxy—The Domain Name System (DNS) is how the Internet translates
domain or website names into Internet addresses or URLs. To use DNS
Proxy, keep the default, Enable. Otherwise, select Disable.
Static DNS 1-3—These entries are valid only when the DNS Proxy option is
disabled. At least one DNS server IP address is provided by your service
provider. You can enter up to three DNS server IP addresses here. The
Gateway will use these for quicker access to functioning DNS servers.
WINS— The Windows Internet Naming Service (WINS) converts NetBIOS
names to IP addresses. If you use a WINS server, enter that server's IP
address here. Otherwise, leave this field blank.
Domain Name—Enter the Domain Name of your local network.
Reserved IP List—Enter the IP addresses you want to reserve, so they will
not be leased to DHCP clients.
8
Click Add Entry; then, click Back to LAN Setup to return to the Local Network
screen.
9
Click Save Settings to save.
3425-00669 Rev E
Local Network
39
Advertisement
Table of Contents
