Chapter 2. Important Service Information; Strategy For Replacing Frus - Lenovo ThinkPad L430 Hardware Maintenance Manual
Thinkpad
Hide thumbs
Also See for ThinkPad L430:
- User manual (198 pages) ,
- (194 pages) ,
- Benutzerhandbuch (194 pages)
Table of Contents
Advertisement
Chapter 2. Important service information
This chapter presents following important service information that applies to all machine types supported by
this manual:
•
"Strategy for replacing FRUs" on page 27
–
"Strategy for replacing a hard disk drive" on page 28
–
"Important notice for replacing a system board" on page 28
–
"How to use error message" on page 28
•
"Strategy for replacing FRUs for CTO, CMV, and GAV" on page 28
–
"Product definition" on page 28
– "FRU identification for CTO, CMV, and GAV products" on page 29
Important:
• If the computer is equipped with both a hard disk drive and an mSATA solid-state drive, do not use
the mSATA solid-state drive as a bootable device. The mSATA solid-state drive is used for "cache"
function only.
• Advise customers to contact the Lenovo Customer Support Center if they need any assistance in
obtaining or installing any software fixes, drivers, and UEFI BIOS downloads. Telephone numbers for
Lenovo Support are available at:
http://www.lenovo.com/support/phone
• System Disassembly/Reassembly videos that show the FRU removals or replacements for the Lenovo
authorized service technicians are available in the following support site:
http://www.lenovoservicetraining.com/ion/
Strategy for replacing FRUs
Before replacing parts:
Ensure that all software fixes, drivers, and UEFI BIOS downloads are installed before replacing any FRUs
listed in this manual.
After a system board is replaced, ensure that the latest UEFI BIOS is loaded to the system board before
completing the service action.
To download software fixes, drivers, and UEFI BIOS, do as follows:
1. Go to http://www.lenovo.com/support.
2. Enter the product number of the computer or press the Run Auto-Detect button on the screen.
3. Select Drivers & Software.
4. Follow the directions on the screen and install the necessary software.
Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs:
• If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall
the original FRU before you continue.
• Some computers have both a processor board and a system board. If you are instructed to replace either
the processor board or the system board, and replacing one of them does not correct the problem,
reinstall that board, and then replace the other one.
• If an adapter or a device consists of more than one FRU, any of the FRUs might be the cause of the error.
Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change.
Replace only the FRU that changed the symptoms.
© Copyright Lenovo 2012
®
27
Hide quick links:
Advertisement
Table of Contents
