Cisco 3200 Series Hardware Reference Manual page 90
Hide thumbs
Also See for 3200 Series:
- Use and care manual (282 pages) ,
- Upgrade manual (60 pages) ,
- Hardware upgrade manual (60 pages)
Table of Contents
Advertisement
Working with Configuration Files
If the server has a directory structure, the configuration file is written to or copied from the directory
associated with the username on the server. For example, if the configuration file resides in the home
directory of a user on the server, specify that user's name as the remote username.
For more information, refer to the documentation for your FTP server.
This section includes this information:
•
•
•
Preparing to Download or Upload a Configuration File by Using FTP
Before you begin downloading or uploading a configuration file by using FTP, perform these tasks:
•
•
•
For more information, refer to the documentation for your FTP server.
Downloading a Configuration File by Using FTP
To download a configuration file by using FTP, follow these steps, beginning in privileged EXEC mode:
Command
Step 1
Step 2
Step 1
configure terminal
Step 2
ip ftp username username
Step 3
ip ftp password password
Cisco 3200 Series Router Hardware Reference
7-12
Preparing to Download or Upload a Configuration File by Using FTP, page 7-12
Downloading a Configuration File by Using FTP, page 7-12
Uploading a Configuration File by Using FTP, page 7-13
Ensure that the WMIC has a route to the FTP server. The WMIC and the FTP server must be in the
same subnetwork if you do not have a router to route traffic between subnets. Check connectivity to
the FTP server by using the ping command.
If you are accessing the WMIC through a Telnet session and you do not have a valid username, make
sure that the current FTP username is the one that you want to use for the FTP download. You can
enter the show users privileged EXEC command to view the valid username. If you do not want to
use this username, create a new FTP username by using the ip ftp username username global
configuration command during all copy operations. The new username is stored in NVRAM. If you
are accessing the WMIC through a Telnet session and you have a valid username, this username is
used, and you do not need to set the FTP username. Include the username in the copy command if
you want to specify a username for only that copy operation.
When you upload a configuration file to the FTP server, it must be properly configured to accept the
write request from the user on the WMIC.
Chapter 7
Purpose
Verify that the RCP server is properly configured by
referring to the
"Preparing to Download or Upload a
Configuration File by Using RCP" section on page
Log in to the WMIC through a Telnet session.
Enters global configuration mode on the WMIC.
This step is required only if you override the default remote
username or password (see Steps 4, 5, and 6).
(Optional) Changes the default remote username.
(Optional) Changes the default password.
Managing Firmware and Configurations
7-15.
OL-5816-10
- Quick Links:
- Introduction to the Cisco 3200 Series...
Hide quick links:
Advertisement
Table of Contents
