Page 3
Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
Page 4
HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will...
Contents Before you begin ..........................1 Getting to Know Your CPE ......................1 Preparing for Installation .........................5 Logging In to the Web-Based Utility ....................8 Troubleshooting ..........................9 Specifications ..........................11 Warnings and Precautions ......................12...
Thank you for purchasing Globe WiMAX CPE! Before you begin Check the following items in the product package. If you find anything missing or damaged, contact the service provider. Globe WiMAX CPE Dedicated Power Adapter Ethernet Cable Quick Start ...
Page 9
Indicator Status Description WiMAX The indicators indicate the signal strength of the WiMAX network. When all the indicators are on, it indicates that the signal strength is at the highest level. Blink The CPE is being upgraded when they blink sequentially. The software is damaged when they blink randomly.
Interface Description POWER The interface is used to connect to the output interface of the power adapter. The interface is used to connect a telephone line. This function is available only after the user has subscribed to the VoIP service. The interface is used to connect the CPE to the computer.
Connecting the Cables Use the cables and the power adapter provided with the product. The cable connection figure is provided for illustration purpose. You can connect the devices to the CPE according to the actual requirements. NOTE: During lightning storms, power off the CPE, and do not touch the antenna.
Page 13
Connecting the External Antenna (Optional) CAUTION: Do not place the CPE outdoors. During lightning storms, stop using the external antenna, and disconnect it from the CPE. Connect the external antenna to the interface labeled with , do as follows: Power off the CPE.
Logging In to the Web-Based Utility Take the Windows XP operating system and the Internet Explorer 6.0 as examples. Ensure that the CPE is connected to the PC. To log in to the Web-based utility, do as follows: Set the IP address of the PC and ensure that the IP address of the PC is in the same network segment as that of the CPE.
Troubleshooting The power indicator is not on. Ensure that the device is powered on. Ensure that the power adapter is compatible with the device. You cannot make calls. Ensure that the telephone is working normally and the telephone line is connected ...
Page 16
If an external antenna is installed, check if it is properly connected. If the problem persists, contact the local service provider. The device or the power adapter overheats. The device may get heated after being used for a long time. Therefore, power off the ...
Specifications Interface One Fast Ethernet (FE) interface One Plain Old Telephone Service (POTS) interface Other Parameters Power adapter input 100–240 V AC Power consumption 10 W Power supply to 12 V, 1 A device Operating 0˚C to 40˚C (32˚F to 104˚F) temperature Operating humidity 5% to 95%, non-condensing...
Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the device described in this section includes the device and its accessories. Basic Requirements During storage, transportation, and operation of the device, keep it dry and prevent it ...
Page 19
Do not place any object (such as a candle or a water container) on the device. If any foreign object or liquid enters the device, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. During thunderstorms, power off the device, and then remove all the cables connected ...
Page 20
Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires may occur. Ensure that the power adapter meets the specifications indicated on the device nameplate. Ensure that the power adapter meets the requirements of Clause 2.5 in ...
Page 21
This device should be installed and operated with a minimum distance of 20 cm between the antenna and all persons. Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред съответства на основните изисквания и другите разпоредби на Директива...
Page 22
EC/5/1999 Irányelv összes lényeges követelményének és vonatkozó előírásának. Gaeilge: Fograí onn Huawei Technologies Co., Ltd leis seo go bhfuil an fheiste seo i gcomhlí onadh leis na fí or-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE.
Page 23
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 1999/5/CE. Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas 1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem. Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka ...
Page 24
Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU). Issue: 02 (2011-05-20) Part Number: 00623754...
Page 28
Huawei Technologies Co., Ltd Huawei Industrial Base, Bantian, Longgang Shenzhen 518129 People’s Republic of China www.huawei.com...