Table of Contents
Advertisement
Chapter 3
Wireless > MAC Filter
Wireless MAC Filter
Select Wireless Network (SSID)
network you want to configure.
Enabled/Disabled
To use the wireless MAC filter, select
Enabled. Otherwise, keep the default, Disabled.
MAC Address Filter
Filter As White List/Filter As Black List
network devices with the MAC addresses on this list, select
Filter As White List. To block access by network devices with
the MAC addresses on this list, keep the default, Filter As
Black List.
MAC 01-20
Enter the MAC addresses of the devices
whose wireless access you want to block or allow.
For each wireless device, its MAC address and connection
status are listed. To copy a MAC address to one of the MAC
01-20 fields, click Copy.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wi-Fi Protected Setup
There are two ways to configure the Gateway's wireless
settings, manual and Wi-Fi Protected Setup. For manual
configuration, click the Basic Settings tab (refer to the
"Wireless > Basic Settings" section for more information).
Wi-Fi Protected Setup is a feature that makes it easy to
set up your wireless network. If you have devices that
support Wi-Fi Protected Setup, then use the following
instructions.
Wireless-G ADSL2+ Gateway with VoIP
Select the wireless
To allow access by
Advanced Configuration
NOTE:
Wi-Fi Protected Setup can only be
used for the default wireless network. (The
Gateway supports up to four wireless networks.
The other three can be configured using the
Wireless > Basic Settings screen of the Gateway's
web-based utility.)
Wireless > Wi-Fi Protected Setup
Wi-Fi Protected Setup
If you have client devices, such as a wireless adapter,
that supports Wi-Fi Protected Setup, then you can use
Wi-Fi Protected Setup to automatically configure wireless
security for your wireless network(s).
There are three methods available. Use the method that
applies to the client device you are configuring.
NOTE:
Wi-Fi Protected Setup configures one
client device at a time. Repeat the instructions
for each client device that supports Wi-Fi
Protected Setup.
Method #1
Use this method if your client device has a Wi-Fi Protected
Setup button.
Wi-Fi Protected Setup button on the
1.
Click or press the
client device. (If Wi-Fi Protected Setup is an on-screen
option, then select it.)
2.
Click the
Wi-Fi Protected Setup button on this
screen.
3.
After the client device has been configured, click
OK. Then refer back to your client device or its
documentation for further instructions.
23
Advertisement
Table of Contents
