Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 17 5000 Series Owner's Manual
Inspiron 17 5000 series
Hide thumbs
Also See for Inspiron 17 5000 Series:
- Quick start manual ,
- Service manual (139 pages) ,
- Setup and specifications (28 pages)
Table of Contents
Advertisement
Removing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
NOTE: These instructions are applicable only for laptops with non-
touchscreen display.
1
Remove the battery.
2
Remove the
3
Follow the procedures from step 1 to step 3 in removing the
4
Follow the procedures from step 1 to step 2 in removing the
5
Remove the keyboard.
6
Remove the
Procedure
1
Close the display and turn the computer over.
2
Disconnect the antenna cables from the wireless card.
3
Remove the antenna cables from the routing guides on the computer
base.
4
Slide the antenna cables through the slot on the computer base.
5
Turn the computer over and open the display as far as possible.
6
Peel off the tape that secures the display cable to the system board.
base
cover.
palm
rest.
Computer. After working inside your
After Working Inside Your
hard
drive.
optical
drive.
73
Hide quick links:
Advertisement
Table of Contents
