troubleshooting
Problem
When coaxial communication is
not available.
Check the Power cord's by periods
The Power cord's coating has
been damaged.
The power cord is hot to touch
when the product is in operation.
The power cord gets hot after
being folded or pulled on.
70_
troubleshooting
Cause and Solution
► Make sure that the camera and monitor are installed within the
recommended distance.
► Use the video amplifier equivalent to coaxitron if the recommended
installation distance is exceeded.
► Check if the camera's ID dip switch is set to OFF, for all switches.
Continuing to use the product when its power cord is damaged constitutes an
electrical and fire hazard. The power plug must be removed from the outlet
immediately, and a qualified service personnel or your system provider should be
contacted for assistance.
Page
-
-
-
-