Table of Contents
Advertisement
Using the Web Browser Interface
Tasks for Your First Web Browser Interface Session
Using the Passwords
Figure 5-4. Example of the Password Window in the Web Browser Interface
The manager and operator passwords are used to control access to all switch
interfaces. Once set, you will be prompted to supply the password every time
you try to access the switch through any of its interfaces. The password you
enter determines the capability you have during that session:
■
■
Using the User Names
If you also set user names in the web browser interface screen, you must
supply the correct user name for web browser interface access. If a user name
has not been set, then leave the User Name field in the password window
blank.
Note that the Command Prompt and switch console interfaces use only the
password, and do not prompt you for the User Name.
If You Lose a Password
If you lose the passwords, you can clear them by pressing the Clear button on
the front of the switch. This action deletes all password and user name
protection from all of the switch's interfaces.
The Clear button is provided for your convenience, but its presence means
that if you are concerned with the security of the switch configuration and
operation, you should make sure the switch is installed in a secure location,
such as a locked wiring closet.(For more information, refer to "Front Panel
Security" in the chapter titled "Configuring Username and Password Secu
rity" in the Access Security Guide for your switch.)
5-10
Entering the manager password gives you full read/write capabilities
Entering the operator password gives you read and limited write capabil
ities.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
