IBM 8302 Hardware Maintenance Manual page 69
Ibm computer hardware user manual
Hide thumbs
Also See for 8302:
- Guide utilisateur (124 pages) ,
- Benutzerhandbuch (122 pages) ,
- Guida per l'utente (120 pages)
Table of Contents
Advertisement
to the system board. For a CD-ROM drive, you might also have an audio cable.
The steps to connect an IDE drive are different depending on the type of drive you
are connecting. Use one of the following procedures for your drive connection.
Connecting the first IDE CD drive or DVD drive:
1. Locate the three-connector signal cable that comes with your computer or with
the new drive.
2. Locate the secondary IDE connector on the system board. See "Types 8307,
8308, 8310, 8311, 8314, and 8315" on page 46.
3. Connect one end of the signal cable to the drive and the other to the secondary
IDE connector on the system board. To reduce electronic noise, use the
connectors at the end of the cable only.
4. Your computer has extra power connectors for additional drives. Connect a
power connector to the drive.
5. If you have a CD-ROM audio cable, connect it to the drive and to the system
board. See "Types 8307, 8308, 8310, 8311, 8314, and 8315" on page 46.
Connecting an additional IDE CD drive or DVD drive:
1. Locate the secondary IDE connector on the system board and the
three-connector signal cable. See "Types 8307, 8308, 8310, 8311, 8314, and 8315"
on page 46.
2. Connect the extra connector in the signal cable to the new CD drive or DVD
drive.
3. Your computer has extra power connectors for additional drives. Connect a
power connector to the drive.
Connecting an additional IDE hard disk drive:
1. Locate the primary IDE connector on the system board. One end of the
three-connector cable connects to the hard disk drive, and the other connects to
the system board. See "Types 8307, 8308, 8310, 8311, 8314, and 8315" on page
46.
2. Connect the extra connector in the signal cable to the new hard disk drive.
3. Your computer has extra power connectors for additional drives. Connect a
power connector to the drive.
What to do next
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Types 8307, 8308, 8310, 8311, 8314, and
8315" on page 68.
Chapter 5. Installing Options
63
Hide quick links:
Advertisement
Table of Contents
