hit counter script
Panasonic TC-L32XM6 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. LED TV
  5. Viera TCL32XM6
  6. Service manual

Panasonic TC-L32XM6 Service Manual

Hide thumbs Also See for TC-L32XM6:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
SERVICE MANUAL
LED TV
FILE NO
T T T T C C C C - - - - L L L L 3 3 3 3 2 2 2 2 XM6
T T T T C C C C - - - - L32XM6X
L32XM6X
L32XM6X
L32XM6X
TC- - - - L32XM6P
TC
TC
TC
L32XM6P
L32XM6P
L32XM6P
1
XM6
XM6
XM6

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-L32XM6

Summary of Contents for Panasonic TC-L32XM6

  • Page 1 FILE NO T T T T C C C C - - - - L L L L 3 3 3 3 2 2 2 2 XM6 SERVICE MANUAL LED TV T T T T C C C C - - - - L32XM6X L32XM6X L32XM6X L32XM6X...
  • Page 2 CONTENTS 1. Safety precautions ....................3 2. Alignment instructions and method of software upgrading........5 3. Working principle analysis of the unit ..............12 4. Specifications....................... 13 5. Block diagram ...................... 14 6. IC block diagram ....................17 7. Wiring diagram ....................24 8.

  • Page 3: Safety Precautions

    Attention: This service manual is only for service personnel to take reference with. Before servicing please read the following points carefully. Safety precautions 1. Instructions Be sure to switch off the power supply before replacing or welding any components or inserting/plugging in connection wire Anti static measures to be taken (throughout the entire production process!): a) Do not touch here and there by hand at will;...
  • Page 4 2.11 Special care must be taken in transporting or handling it. Exquisite shock vibration may lead to breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strong case before the transportation or handling. 2.12 For the storage make sure to put it in a place where the environment can be controlled so as to prevent the temperature and humidity from exceeding the limits as specified in the manual.

  • Page 5: Alignment Instructions

    2. Alignment instructions (1) Test equipment VG-859 (YPbPr, VGA, HDMI signal generator) FLUKE 54200(TV signal generator) CA310 (white balancer) (2) Power test Connect main board, power board and IR board according the wiring diagram, connect the power and press power key (Remote controller or Keypad) button to turn on the TV. a) Test the pin voltage of P802/power board , the data is shown in table1: Table1 voltage data of P802 For 32”...
  • Page 6 (3) Alignment flow-chart The alignment flow-chart is shown as fig-1 Check if EDID, HDCP KEY, FLASH are written Combined test for general assembly Auto Gamma adjustment Connect to the center signal source and check each Function of TV (station leaking, analog control, etc.) Check the output of speaker.
  • Page 7 (4) Adjustment instruction At any input source then press the “←”, “EXIT” and “OK” (using RC within 1 sec) to enter factory mode During Factory menu, if “EXIT” key is pushed, system will exit factory mode. 4-1. Auto Gamma Adjustment & Check 4-2.1.
  • Page 8 (5) Items of Factory menu When in any source, press the “Left -> Exit -> Enter” key of remote control can enter into factory mode. During Factory menu, only “EXIT” key is pushed, system will exit factory mode. Press up and down key can move high light item from Model Change -> Color Temp. Adjust -> Auto Gamma Adjust ->...
  • Page 9 7)ADC Calibration ADC Calibration function is reserved for calibration by hand (PQ engineer only). 8)Shipping reset Reset all settings of OSD menu to default value. Reset settings: Channel table, Model table (H/V Position, Clock, Phase), Source dependent setting (Contrast, Brightness etc.), Common setting (Volume, Language etc.), Parental Control (Rating, Password etc), Closed Caption.
  • Page 10 6-4 HDMI terminal Input HDMI signal (VG859 signal generator), separately input the signals listed in table6 and check the display and sound (32 KHz, 44.1 KHz, 48 KHz) at any situation (power on, channel switch and format convert, etc.) Table6 HDMI signal format HDMI 1/2/ PIXEL...
  • Page 11 6-5 other functions check a) Check the sleep timer, picture/sound mode, OSD, stereo and analog TV Teletext, etc. (7) Firmware update process (1) Plug the USB with the firmware file named upgrade_2013_NA_60.pkg (2) If system detect upgrade_2013_NA_60.pkg, USB upgrade message would appear automatically. (3) Press Up key to select Yes, and then press OK key to start the upgrading.

  • Page 12: Working Principle Analysis Of The Unit

    Working principle analysis of the unit 1. NTSC signals flow: Antenna signal will be send to tuner TDST-H021F, t h e n T u n e r w i l l b e demodulating and output standard video signal TV-CVBS, and sound SIF signal. TV-CVBS will send to the master control IC MT5385 to video decode, de-interlace and scaler, then output LVDS level drive for panel display.

  • Page 13: Specifications

    4. 4. 4. 4. Specifications...

  • Page 14: Block Diagram

    SPE32T 32” Block Diagram 5-1 Block Diagram A70 60Hz Models by WXGA :2x10 MTK MT5835 Platform Full-HD :2x20 Panel out R_out Audio TAS5707 L_out DDR3 1G-1600 H5TQ1G63DFR-PBC Audio I2S output DTV system IC Flash 16MB MX25L12845EMI-10G MT5385 Keypad EEPROM 64KB IF +/- 24C32 Crystal...
  • Page 15 Power board:FSP...
  • Page 16 Power board:DARFON...

  • Page 17: Ic Block Diagram

    IC block diagram 1. MT5385 GENERAL FEATURE LIST Host CPU  ARM11 single core 700MHz  Floating Point Unit  16K I-Cache and 16K D-Cache for ARM11 core  128K L2 Cache  Boot ROM  Boot from serial flash, NAND flash ...
  • Page 18  DIVX3 / DIVX4 / DIVX5 / DIVX6 / DIVX HD  Full-HD 30P dual decoder AVS Decoder (option)  Jizhun profile @Level 6.2 (supports 4:2:0 format)  Full-HD 30P dual decoder RMVB Decoder (option)  RealVideo8/9/10  Full-HD 30P dual decoder VP6 Decoder (option) VP8 Decoder (option) ...
  • Page 19 Video Plane  Supports video freeze and over scan  Flesh tone management  Gamma correction  Color Transient Improvement (CTI)  2D Peaking  Saturation/hue adjustment  Brightness and contrast adjustment  Black and White level extender  Adaptive Luma management ...
  • Page 20  Supports 6/8/10-bit one-link, 6/8/10-bit dual-link LVDS transmitter  Built-in spread spectrum for EMI performance  Programmable panel timing output Mini-LVDS  Dual port 8-bit 6 pairs mini-LVDS output CVBS In  On-chip 54 MHz 10-bit video ADC  Supports PAL (B,G,D,H,M,N,I,Nc), NTSC, NTSC-4.43, SECAM ...
  • Page 21  Stereo demodulation, SAP demodulation  Mode selection (Main/SAP/Stereo) Audio DAC  Supports 2-pair audio DACs DRAM Controller  16-bit DDR2/DDR3 interface  Supports DDR2 1066Mhz, DDR3 1333Mhz  Supports 512Mb or 1Gb or 2Gb DDR2 and DDR3 DRAM device ...
  • Page 22 Digital TV (ATSC / Open-Cable) Demodulator  Compliant with ATSC digital television standard  Supports SCTE DVS-031 and ITU J.83 Annex B digital CATV standard  Accept direct IF (44 MHz or 43.75 MHz) and low IF (5.38 MHz)  NTSC interference rejection capability ...
  • Page 23 2. TI TAS5707 20-W STEREO DIGITAL AUDIO POWER AMPLIFIER WITH EQ AND DRC...

  • Page 24: Wiring Diagram

    SPE32T 32-inch Wiring Diagram 7-1 BLOCK...
  • Page 25 7-2 Wiring Connection CMI panel Main board to Panel Main board to Speaker SPE32T SPE32T DC02L00700I DC02A00130I 280 mm L:280 & R:480 mm Panel side Main board CN1 Main board CN4 Speaker P-TWO LVDS cable JWT A2006WR0-2X10P JWT A2001WR2-4P Color Right 187053-30091 1 VCC...
  • Page 26 16 RX1+ White 17 LVDS_D1O_P 3 GND Black 3 GND 17 GND Black 5 GND 4 LED_G Orange 4 LEDG 18 RX2- Orange 16 LVDS_D2O_N 5 LEDR 19 RX2+ White 15 LVDS_D2O_P 6 Light_S_C 20 GND Black 6 GND 7 Light_S_D 21 RXCLK- Brown 14 LVDS_CO_N...
  • Page 27 Main board to Power board:...

  • Page 28: Trouble Shooting

    8. Trouble shooting 1. Fault clearance Before calling your dealer or service center for assistance, check the matters below once again. (1) Make sure you have connected LED TV to your equipment as described in the section “ CONNECTING LED TV”. (2) Check cable connection.

  • Page 29: Troubleshooting Guide

    2. Troubleshooting guide The flow chart shown below will help you to troubleshoot your Televison set with it doesn’t display normally. Each procedure offers a simple way to check for system errors. Before starting, ensure that there is a signal in and that the Televison is turned on. 2-1 Power LED no light...
  • Page 30 2-2 Has audio but no video out Has video but no audio out step 1...
  • Page 31 Has video but no audio out step 2...

  • Page 32: Schematic Diagram

    9.SCHEMATIC DIAGRAM --ELECTRON...
  • Page 33 PCB1 PCB1 MT5385 Power Tree (12V) AMP_VCC For AMP FB20 +12V SOT-23B SOP8 LMBT3904LT1G DMG4435SSS FB21 LVDS_PWR 5V_SW FB22 (LVDS_PWR_EN) For Panel (NC) (Option) (1.2V) +5VSB SOP8-T5 AX3518ESA VCCK POWER_EN VTV-L32616 REV:1 VTV-L32616 REV:1 (About 3.2A) (3.3V) AX1007E33A 3V3SB FIRMWARE FIRMWARE SOT-223 FW L32616...
  • Page 34 Buck Converter 4A (1.2V) POWER_EN +5VSB +3.3V_Standby power (3V3SB) VCCK CLS UPB201212T-121Y-N 5A CLS UPB201212T-121Y-N 5A AX3518ESA AX3518ESA SCD0403T-2R2M 2.2uH/3.8A SCD0403T-2R2M 2.2uH/3.8A 100mA CLS UPB201212T-121Y-N 5A CLS UPB201212T-121Y-N 5A 3V3SB +5VSB 10/1% 10/1% 10/1% 10/1% 15pF/50V/0402 15pF/50V/0402 AX1007E33A AX1007E33A 0.1uF/10V/0402 0.1uF/10V/0402 VOUT 332K/1%...
  • Page 35 AOSDATA0_1 AOSDATA0 33/0402 33/0402 AVDD3V3 Analog Normal Power AMP_BCK_1 AMP_BCK Add R99 33/0402 33/0402 22pF/50V/0402 22pF/50V/0402 ADAC_3V3 reserve for (Pin65) LED flash AMP_LRCLK_1 AMP_LRCLK AVDD3V3 AVDD33_DAC (Pin136) AVDD1V2 0.1uF/10V/0402 0.1uF/10V/0402 when AC-ON 33/0402 33/0402 22pF/50V/0402 22pF/50V/0402 0/0402 0/0402 AVDD33_MEMPLL AMP_MCK_1 AMP_MCK 0/0402 0/0402...
  • Page 36 DVDD3V3 SPI FLASH DVDD3V3 4.7K/1%/0402 4.7K/1%/0402 4.7K/1%/0402 4.7K/1%/0402 POCE0# DVDD3V3 POOE# PDD7 R140 R140 10K/0402/NC 10K/0402/NC POOE# NC/SIO3 SCLK DOUT HOLD# DVDD3V3 PDD6 POOE# PDD6 SI/SIO0 WP#/VPP PDD6 4.7K/1%/0402 4.7K/1%/0402 MX25L6406EM2I-12G/NC MX25L6406EM2I-12G/NC POCE0# POCE0# PDD7 PDD7 SO/SIO1/PO7 WP#/SIO2 MX25L12845EM1-10G SOP16 MX25L12845EM1-10G SOP16 0.1uF/10V/0402 0.1uF/10V/0402...
  • Page 37 SMTDR75-150K 15uH/2A SMTDR75-150K 15uH/2A SPK_OUTL+ 11 DVDD DVDD3V3 FB12 FB12 PBY160808T-300Y 3A PBY160808T-300Y 3A 3.3/1206/NC 3.3/1206/NC AMP_VCC C100 C100 C101 C101 C102 C102 C105 C105 C106 C106 C103 C103 C104 C104 C109 C109 C110 C110 0.1uF/50V 0.1uF/50V 0.1uF/50V 0.1uF/50V 0.1uF/50V 0.1uF/50V 0.1uF/50V 0.1uF/50V...
  • Page 38 Component input A/V input OPT SPDIF out R123 R123 SPDIF_OUT Close to IC Close to CONN. 47/1%/0402 47/1%/0402 1x5_CX_COMPO-AUDIO_SW_H8.5 1x5_CX_COMPO-AUDIO_SW_H8.5 2/1 Modify CVBS0P C143 C143 Y-V_IN 5V_SW C170 C170 CVBS0P 100/1%/0402 100/1%/0402 100pF/25V/0402/NC 100pF/25V/0402/NC 47nF/16V/0402 47nF/16V/0402 FB16 FB16 10/1%/0402 10/1%/0402 PBY160808T-300Y 3A PBY160808T-300Y 3A SOY0...
  • Page 39 WXGA A2006WV0-2X10P (PIN21~PIN40) A2006WV0-2X20P (PIN1~PIN40) A2006WR0-2X20P A2006WR0-2X20P TX_AO0P TX_AO0N TX_AO0P TX_AO0N P-TWO 30P 1.00MM/NC P-TWO 30P 1.00MM/NC TX_AO1P TX_AO1N TX_AO1P TX_AO1N LVDS_PWR TX_AO2P TX_AO2N TX_AO2P TX_AO2N TX_AOCKP TX_AOCKN TX_AOCKP TX_AOCKN TX_AO3P TX_AO3N R128 R128 TX_AO3P TX_AO3N TX_AO3P 4.7K/NC 4.7K/NC TX_AO3N TX_AO4P TX_AO4N TX_AO4P...
  • Page 40 RDQ0 RDQ0 RDQ1 DDR3#1 RDQ1 Damping and Termination for CLK RDQ2 1Gb DDR3-1600 for H5TQ1G63DFR-PBC RDQ2 RDQ3 RDQ3 RDQ4 RDQ4 RDQ5 RDQ5 RDQ6 H5TQ1G63DFR-PBC_MTK H5TQ1G63DFR-PBC_MTK RDQ6 Close to Mainchip Close to DRAM RDQ7 RDQ7 RDQ8 RDQ8 RDQ9 RDQ9 RDQ0 B_A0 RCLK0 RDQ10 RDQ10...
  • Page 41 R149 R149 HDMI_CEC HDMI_CEC For ESD Test 100/1%/0402 100/1%/0402 HDMI port 1 RX0_2 RX0_2 RX1_2 QTC24CG900U QTC24CG900U RX0_2B TMDSD2+ RX0_2B RX1_2B RX0_1 DSHLD0 RX0_1 RX0_1B TMDSD2- RX0_1B RX1_1 QTC24CG900U QTC24CG900U RX0_0 TMDSD1+ RX0_0 HDMI_PLUGPWR1 RX1_1B RX0_0B DSHLD1 RX0_0B RX0_C TMDSD1- RX0_C RX1_0 QTC24CG900U...
  • Page 42 +3.3V_TUNER_1 +3.3V_TUNER FB18 FB18 +3.3V_TUNER Depend on tuner SPEC. PBY160808T-300Y 3A PBY160808T-300Y 3A C187 C187 C188 C188 C189 C189 R170 R170 4.7K/1%/0402 4.7K/1%/0402 R171 R171 4.7K/1%/0402 4.7K/1%/0402 TDST-H020F TDST-H020F 0.1uF/10V/0402 0.1uF/10V/0402 330pF/50V/0402 330pF/50V/0402 10uF/10V/0805 10uF/10V/0805 TUNER_CLK R173 R173 100/1%/0402 100/1%/0402 SCL_TUNER SCL_TUNER TUNER_DATA...
  • Page 43 DVDD3V3 R186 NC if change ACD DTC AMP_VCC C226,C227 for R185 R185 EMI solution 22K/0402/NC 22K/0402/NC R186 R186 4.7K/0402 4.7K/0402 C206 C206 C226 C226 R217 R217 22uF/16V/1206 22uF/16V/1206 10nF/25V/0402 10nF/25V/0402 +12V C227 C227 10nF/25V/0402 10nF/25V/0402 (12V PANEL) AC Drop_DET LVDS_PWR C207 C207 10uF/10V/0805...
  • Page 44 SCHEMATIC DIAGRAM...
  • Page 45 Power_Key 100F 100F R0603 R0603 SAR1 SAR0 PESD5V0S1BA PESD5V0S1BA 104/50V 104/50V Power_Key SOD323 SOD323 C0805 C0805 POWER POWER JWT A2001WR2-4P JWT A2001WR2-4P HD-04-P2R HD-04-P2R SWD-EVQPA SWD-EVQPA SAR0 18KF 18KF 6.04KF 6.04KF 16KF 16KF R0603 R0603 R0603 R0603 R0603 R0603 VOL- VOL- 104/50V 104/50V...
  • Page 46 CCM1 CCM1 CC-12DP7.5-R CC-12DP7.5-R 604KF 604KF 1.1UH 1.1UH R0603 R0603 SR5100 SR5100 L7DP6 L7DP6 24V1 RM10 RM10 CD4148WSN CD4148WSN R1206 R1206 D0805 D0805 604KF 604KF R0603 R0603 CEM7 CEM7 RM34 RM34 RM33 RM33 RM25 RM25 RM24 RM24 RM35 RM35 RM37 RM37 CEM9 CEM9...
  • Page 47 FSP079-4F01 3BS0334712GP P/N: size: A2 rev: 2.4 5Vcc 1.7A 1.7A APPROVED: CHECKED: DESIGNER: 12Vcc 1.0A 1.0A Gerry Joey Feimin 12Va 0.8A 1.6A Sheet Date: 2012/12/4 PCB File: FSP079-4F01-R2 H=23.0mm USA 32" 120V WO/PFC 24Vled 1.31A 1.55A File: E:\AD6\70W\FSP079-4F01-R2-1(Panasonic-A70-32)\FSP079-4F01-WITH VALUE\FSP079-4F0 :7000P-0106...
  • Page 48 (1.006V) SAR1 18KF 100nF 16KF 6.04KF LSBLC05C FSP Technology Inc. FSP GROUP INPUT/OK/ FSP079-4F01 TITLE: Hold for MENU 3BS0334712GP size: A4 rev: 2.4 P/N: APPROVED: CHECKED: DESIGNER: Gerry Feimin Joey Sheet Date: 2012/12/4 PCB File: FSP079-4F01-R2 File: E:\AD6\70W\FSP079-4F01-R2-1(Panasonic-A70-32)\FSP079-4F01-WITH VALUE\FSP079-4 :7000P-0106...
  • Page 49 APPENDIX-A: Main assembly SPE32 (TC-L32XM6) Version:02 Part Number REF. Chassis no: SPE32T Description Q’ty Remarks Product no SPE32TMA010 Product no SPE32TMA101 SKD-ADI PCBA IR/B 454C4070L01 454C4070L01 FIRMWARE M/B 461C6270L31 461C6270L31 LCD MODU AC6VM3205R1 SPK SET(90d)(PIN90d) CG100513G0I CG100513G0I H-CON SET DC02A00130I...
  • Page 50 MABT40140ZI 30 RATING NP-TC-L32XM6 EJ4PE32000I EJ4PE32000I 31 CARTON-TC-L32XM6 HB4PE32011I Change from PK28PE3200I to 32 MANUAL KITS-32XM6 PK28PE3201I PK28PE3201I PK28PE3201I 33 ENERGY GUIDE-TC-L32XM6 HGPE320000I HGPE320000I 34 ZIPPERED BAG HK3OL77801I HK3OL77801I 35 PE BAG FOR TV HK3PD32001I HK3PD32001I 36 SCRW-SEMS-W MAA7000130I MAA7000130I...
  • Page 51 41 STAND METAL (32XM6) ECPE32T020I ECPE32T020I 42 EPS TR (32XM6) FJPE32T050I 43 EPS TL (32XM6) FJPE32T060I 44 EPS BR (32XM6) FJPE32T070I 45 EPS BL (32XM6) FJPE32T080I...
  • Page 52 APPENDIX-A: Main assembly SPE32 (TC-L32XM6X) Version:02 Part Number REF. Chassis no: SPE32T Description Q’ty Remarks Product no SPE32TMX010 Product no SPE32TMX101 SKD-PANAMEX/PAVCA PCBA IR/B 454C4070L01 454C4070L01 FIRMWARE M/B 461C6270L32 461C6270L32 LCD MODU AC6VM3205R1 SPK SET(90d)(PIN90d) CG100513G0I CG100513G0I H-CON SET DC02A00130I DC02A00130I H-CON SET DC02L00700I...
  • Page 53 19 BARRIER P-PCB LCD ELPE32T010I ELPE32T010I 20 SIDE AV BRACKET(32B6 FAPD32T050I FAPD32T050I 21 SPEAKER BRACKET(32XM FAPE32T050I FAPE32T050I 22 CH MOUNT BOSS(32XM6) FAPE32T060I FAPE32T060I 23 LOCKING CABLE TIE KA000600ZZI KA000600ZZI 24 SUPPORT(32XM6) LCPE32T020I LCPE32T020I 25 SCREW+LOCK WASHER(8) MAA8002040I MAA8002040I 26 SCREW MAAI30004ZI MAAI30004ZI 27 SCREW...
  • Page 54 41 STAND METAL (32XM6) ECPE32T020I ECPE32T020I 42 EPS TR (32XM6) FJPE32T050I 43 EPS TL (32XM6) FJPE32T060I 44 EPS BR (32XM6) FJPE32T070I 45 EPS BL (32XM6) FJPE32T080I...
  • Page 55 APPENDIX-A: Main assembly SPE32 (TC-L32XM6P) Version:02 Part Number REF. Chassis no: SPE32T Description Q’ty Remarks Product no SPE32TMP010 Product no SPE32TMP101 SKD-ADI PCBA IR/B 454C4070L01 454C4070L01 FIRMWARE M/B 461C6270L32 461C6270L32 LCD MODU AC6VM3205R1 SPK SET(90d)(PIN90d) CG100513G0I CG100513G0I H-CON SET DC02A00130I DC02A00130I H-CON SET DC02L00700I...
  • Page 56 19 BARRIER P-PCB LCD ELPE32T010I ELPE32T010I 20 SIDE AV BRACKET(32B6 FAPD32T050I FAPD32T050I 21 SPEAKER BRACKET(32XM FAPE32T050I FAPE32T050I 22 CH MOUNT BOSS(32XM6) FAPE32T060I FAPE32T060I 23 LOCKING CABLE TIE KA000600ZZI KA000600ZZI 24 SUPPORT(32XM6) LCPE32T020I LCPE32T020I 25 SCREW+LOCK WASHER(8) MAA8002040I MAA8002040I 26 SCREW MAAI30004ZI MAAI30004ZI 27 SCREW...
  • Page 57 41 STAND METAL (32XM6) ECPE32T020I ECPE32T020I 42 EPS TR (32XM6) FJPE32T050I 43 EPS TL (32XM6) FJPE32T060I 44 EPS BR (32XM6) FJPE32T070I 45 EPS BL (32XM6) FJPE32T080I...
  • Page 58 APPENDIX-B: SPE32 Exploded View...
  • Page 59 Type A Type B POP label...
  • Page 60 11 Disassembly and Assembly Instructions 11.1. PEDESTAL 1. Lay down the unit so that the rear cover faces upward. 2. Remove the 4 screws. 3. Remove the Pedestal_assy 11.2. Back cover 1. Remove the 20 screws. 2. Remove the Back cover.
  • Page 61 11.3. P-Board 1. Remove the 4 screws. 2. Disconnect the connectors (P1, P2, P3) 3. Remove the P-Board. 11.4. M-Board 1. Remove the 2 screws. 2. Disconnect the connectors (M1,M2, M3,M4). 3. Remove the M-Board.
  • Page 62 11.5. Speaker unit 1. Remove the 4 screws. 2. Remove the speaker units. 11.6. IR-Board 1. Disconnect the connectors (I1). 2. Remove the IR-Board.
  • Page 63 11.7. Metal parts 1. Remove the 4 screws. 2. Remove the metal parts (M1,M2, M3,M4). 11.8. LED Panel 1. Remove the LED panel. LED panel Cabinet...
  • Page 64 PE32T SERVICE MANUAL CHANGE LIST DATE Page VERSION CHANGE ITEM 49-54 Update the APPENDIX Screw type 10 / Jan. 2013 49-57 Update the APPENDIX parts list 27 / Feb. 2013...

This manual is also suitable for:

Tc-l32xm6xTc-l32xm6p

Table of Contents