Spanning-Tree Mst Priority - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
spanning-tree mst priority
spanning-tree mst priority
Use the spanning-tree mst priority global configuration command on the switch stack or on a
standalone switch to set the switch priority for the specified spanning-tree instance. Use the no form of
this command to return to the default setting.
Syntax Description
instance-id
priority
Defaults
The default is 32768.
Command Modes
Global configuration
Command History
Release
12.2(40)EX1
Examples
This example shows how to set the spanning-tree priority to 8192 for multiple spanning-tree instances
(MST) 20 to 21:
Switch(config)# spanning-tree mst 20-21 priority 8192
You can verify your settings by entering the show spanning-tree mst instance-id privileged EXEC
command.
Related Commands
Command
show spanning-tree
spanning-tree mst cost
spanning-tree mst port-priority
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-652
spanning-tree mst instance-id priority priority
no spanning-tree mst instance-id priority
Range of spanning-tree instances. You can specify a single instance, a range of
instances separated by a hyphen, or a series of instances separated by a comma. The
range is 0 to 4094.
Set the switch priority for the specified spanning-tree instance. This setting affects
the likelihood that the switch is selected as the root switch. A lower value increases
the probability that the switch is selected as the root switch.
The range is 0 to 61440 in increments of 4096. Valid priority values are 0, 4096,
8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152,
53248, 57344, and 61440. All other values are rejected.
Modification
This command was introduced.
mst instance-id
Chapter 2
Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Description
Displays MST information for the specified interface.
Sets the path cost for MST calculations.
Configures an interface priority.
OL-13271-01
Advertisement
Table of Contents
