hit counter script

Operation; Troubleshooting - Honeywell HZ-2000 Series Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

035-02417-000_r2 HZ-2000 OM Eng.fm Page 2 Thursday, March 13, 2003 5:10 PM

OPERATION:

• Place the heater on a firm, level and open
surface free from obstructions and at least 3
feet from any wall. DO NOT use on an
unstable surface such as bedding or deep
carpeting.
• Plug in the heater. The power light will
illuminate.
• Turn the Thermostat knob fully clockwise to the
HIGH setting.
• When the room reaches a comfortable
temperature, slowly turn the Thermostat control
counter-clockwise until the heater goes off.
This is the point at which the Thermostat setting
equals the room temperature. At this setting,
the Thermostat will automatically turn the
heater on and off to maintain this selected
temperature.
• Unplug the heater to turn the power OFF.
Always unplug the heater when not in use.
SAFETY FEATURES:
This product is also equipped with an automatic
safety cut-off. If the heater stops unexpectedly,
the safety cut-off may have engaged. If this
happens, the heater will not restart until it has
been unplugged, allowed to cool and then
plugged back in.
:

TROUBLESHOOTING

If your heater shuts off unexpectedly, safety
features may have been activated to prevent
overheating. If this happens:
• Be sure the power cord is plugged into a
working electrical outlet.
• Check your thermostat setting. The unit may
simply be off because you have reached your
desired heat setting.
• Check for any obstructions. If you find one,
turn the heater OFF by unplugging it. Wait at
least 10 minutes to allow the heater to cool
completely before removing any obstruction.
When done, plug-in the heater and follow the
OPERATION INSTRUCTIONS.
For more troubleshooting tips, visit our website at:
www.kaz.com
NOTE: IF YOU CONTINUE TO EXPERIENCE A
PROBLEM, PLEASE RETURN THE HEATER
TO THE PLACE OF ORIGINAL PURCHASE OR
SEE YOUR WARRANTY. DO NOT ATTEMPT
TO OPEN THE HEATER YOURSELF. DOING
SO MAY VOID YOUR WARRANTY AND
CAUSE DAMAGE TO THE HEATER OR
PERSONAL INJURY. IF YOU HAVE ANY
QUESTIONS REGARDING THIS HEATER,
PLEASE CALL OR WRITE:
Kaz Home Environment
Consumer Relations Department
250 Turnpike Road
Southborough, MA 01772
Toll Free 1-800-332-1110
E-mail: consumerrelations@kaz.com
CLEANING AND STORAGE
We recommend that the heater be cleaned at
least once a month and before off-season
storage.
• Turn the heater OFF by unplugging it. Allow it
to cool completely.
• Use only a dry cloth to clean the external
surfaces of the heater. DO NOT USE WATER,
WAX, POLISH, OR ANY CHEMICAL
SOLUTION.
• Clean your heater using the above-mentioned
steps, then pack the heater in its original
container and store it in a cool, dry place.
• This heater does not disassemble.
:
ELECTRICAL RATING
This product is rated 12.5 Amps (1500 Watts) at
120 VAC, 60 Hz.
2
:

Advertisement

Table of Contents
loading

Table of Contents