Table of Contents
Advertisement
Dubbing To Or From A VCR
To Use This Camcorder As A Player
1
Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 16.
2
Set the VIDEO/DSC Switch
D70 only), then set the camcorder's Power Switch
"PLAY" while pressing down the Lock Button
on the switch, turn on the VCR's power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached, press
7
on the camcorder.
4/6
5
7
Press 4/6
on the camcorder and engage the
VCR's Record mode.
6
Engage the VCR's Record-Pause mode and press
7
on the camcorder.
4/6
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
As the camcorder starts to play your footage it will appear
on your TV. This will confirm the connections and the AUX
channel for dubbing purposes.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
pg. 30, 32).
Or, press DISPLAY
(provided with GR-D90/D70 only) to turn on/off the
date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
pg. 31, 32).
• Indications other than date/time and time code
..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in
the Menu Screen (
4
to "VIDEO" (GR-D90/
t
located
l
on the remote control
pg. 30, 32).
For GR-D90/D70 Owners:
To Use This Camcorder As A Recorder
1. Set the VIDEO/DSC Switch
the camcorder's Power Switch
pressing down the Lock Button
switch.
2. Set "S/AV INPUT" to "ON" and set "REC MODE" to
y
to
"SP" or "LP" (
3. Connect the cables as shown in the illustration and
load a cassette to record on.
4. Press the Recording Start/Stop button
engage the Record-Pause mode. "
on the screen.
5. Press the Recording Start/Stop button
recording.
6. Press the Recording Start/Stop button
engage the Record-Pause mode.
rotating.
NOTES:
After dubbing, set "S/AV INPUT" back to "OFF".
Analog signals can be converted to digital signals with
this procedure.
It is also possible to dub from another camcorder.
To
S-VIDEO
S-Video cable
(optional)
To S-VIDEO
IN or OUT
TV
* When connecting the cable, open this cover.
** Connect when an S-Video cable is not used.
4
to "VIDEO", then set
y
to "PLAY" while
t
located on the
pg. 31).
AV. IN
3
rotates.
3
7
4
Connector
cover*
Audio/
Video cable
(provided)
)
Yellow to VIDEO**
IN or OUT
Red to AUDIO
R IN or OUT
White to
AUDIO L
IN or OUT
VCR
w
to
" appears
w
to start
w
again to
stops
(
To AV
EN
33
DUBBING
Hide quick links:
Advertisement
Table of Contents
