How To Attach The Core Filter; Automatic Demonstration - JVC GR-D90 GR-D70 Instructions Manual

Jvc digital video camera instructions

Hide thumbs Also See for GR-D90 GR-D70:

Instructions manual (56 pages)

Instructions manual (56 pages)

Table Of Contents

Table of Contents

Attach the Core Filter(s) (if provided with your model

interference.

Stopper

Release the

stoppers on both

ends of the Core

Filter.

When connecting cables, attach the end with the Core Filter to the camcorder.

Be sure to use a cable with a thickness that will allow it to be wound around the core filter.

Automatic Demonstration takes place when

"DEMO MODE" is set to "ON" (factory-preset).

Automatic Demonstration starts when there is no operation for

about 3 minutes after the Power Switch

and no cassette is in the camcorder.

Performing any operation during the demonstration stops the

demonstration temporarily. If no operation is performed for more

than 3 minutes after that, the demonstration will resume.

"DEMO MODE" remains "ON" even if the camcorder power is

turned off.

To cancel Automatic Demonstration:

1. Set the Power Switch

Button

located on the switch and press the MENU/VOLUME

wheel

in. The Menu Screen appears.

2. Rotate the MENU/VOLUME wheel

and press it.

3. Rotate the MENU/VOLUME wheel

and press it. The Sub Menu appears.

4. Rotate the MENU/VOLUME wheel

it.

5. Rotate the MENU/VOLUME wheel

and press it twice. The normal screen appears.

NOTE:

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on

the LCD monitor or viewfinder.