Maintenance - JVC KS-LX200R Instructions Manual
Jvc cassette receiver instructions
Hide thumbs
Also See for KS-LX200R:
- Instructions manual (146 pages) ,
- Service manual (99 pages) ,
- Installation & connection manual (4 pages)
Table of Contents
Advertisement
MAINTENANCE
This unit requires very little attention, but you will
be able to extend the life of the unit if you follow the
instructions below.
To clean the heads
• Clean the heads after every 10 hours of use using
a wet-type head cleaning tape (available at an
audio store.)
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
• Always store the tapes to their storage cases after
use.
• Do not store tapes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
36
CAUTION:
• Do not play the tapes with peeling labels;
otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape may
become entangled with the mechanism.
• Do not leave a cassette in the cassette compartment
after use, as the tape may become slack.
The function below is also provided to ensure the
longer life of this unit.
Ignition key-off release/Ignition key-on
play
• Turning off the ignition key with a cassette in the
compartment automatically releases the tape from
the unit's tapehead.
• Turning on the ignition key with a cassette in the
compartment starts playback automatically if you
turned off the ignition during tape play.
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
