Sip/Bri Configuration - Cisco UC320W Configuration Manual

Voip gateway

Hide thumbs Also See for UC320W:

Table of Contents

SIP/BRI Configuration

The SIP/BRI configuration screen displayed next by the UC320W Configuration

Wizard is where the administrator defines the Cbeyond SIP trunk parameters,

including the DIDs assigned to the customer. UC320W now offers a "canned"

configuration option for a Generic SIP Provider and for a Mediatrix BRI Gateway

from the Provider dropdown list. Additional providers, including Cbeyond, may be

added in a future release.

To define the SIP service, the administrator must click the drop-down list and select

"SIP Generic SIP Provider". This selection activates the SIP trunk Settings and Phone

Numbers fields.

With the Settings fields expanded, the administrator must complete the following

fields for the Cbeyond SIPconnect trunking service. Please note that the screenshot

below shows the sample UC320W configuration and is ONLY AN EXAMPLE.

Customers must rely on documentation provided by Cbeyond for the correct

UC320W/SIPconnect settings.

Description: Cbeyond

Proxy: Provided in Cbeyond's initial setup documentation, this is typically

something like sipconnect.atl0.cbeyond.net but depends on the customer's market.

This refers to Cbeyond's Broadsoft application server's SRV record.

Require Registration: Must be checked.

Outbound Proxy: This is also provided in Cbeyond's initial setup documentation

and refers to Cbeyond's SBCs. It usually looks something like "sip-

proxy.atl0.cbeyond.net".

Call Capacity: Provided in Cbeyond's initial setup documentation. This can be

derived from the number of DIDs purchased. A 12-line service, for example, would

set "call capacity" to 12. Note that the licensed features of the UC320W itself must

permit setting the call capacity to what has been purchased from Cbeyond. In other

words, an 8-line UC320W will not support a 12-line Cbeyond service. The sizing of

the UC320W and Cbeyond line counts should be determined well before the

installation process begins.

Prefix dialed numbers with "+1": Should be unchecked.

Company Name: The name of the SIPconnect customer.

Account ID: The "main number" assigned to the customer should be entered here.

The is the "parent" SIPconnect number that represents the entire customer account

Table of Contents