Cisco 7906G Administration Manual page 105
Unified ip phone for cisco unified callmanager 4.1(3)
Hide thumbs
Also See for 7906G:
- Administration manual (278 pages) ,
- User manual (112 pages) ,
- User giude (90 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-2
Network Configuration Menu Options (continued)
Option
Description
DNS Server 1
Primary Domain Name System
(DNS) server (DNS Server 1) and
DNS Server 2
optional backup DNS servers
DNS Server 3
(DNS Server 2–5) used by the
phone.
DNS Server 4
DNS Server 5
Operational
Auxiliary Virtual Local Area
VLAN ID
Network (VLAN) configured on a
Cisco Catalyst switch in which the
phone is a member.
If the phone has not received an
auxiliary VLAN, this option
indicates the Administrative
VLAN.
If neither the auxiliary VLAN nor
the Administrative VLAN are
configured, this option is blank.
Admin. VLAN
Auxiliary VLAN in which the
ID
phone is a member.
Used only if the phone does not
receive an auxiliary VLAN from
the switch, ignored otherwise.
DHCP Enabled
Indicates whether DHCP is being
used by the phone.
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Network Configuration Menu
To Change
Unlock network configuration options.
1.
Set the DHCP Enabled option to No.
2.
Scroll to the appropriate DNS Server
3.
option, press the Edit softkey, and then
enter a new DNS server IP address.
Press the Validate softkey.
4.
5.
Repeat Steps 3 and 4 as needed to assign
backup DNS servers.
Press the Save softkey.
6.
The phone obtains its Operational VLAN ID
via Cisco Discovery Protocol (CDP) from the
switch to which the phone is attached. To
assign a VLAN ID manually, use the Admin.
VLAN ID option.
Unlock network configuration options.
1.
Scroll to the Admin. VLAN ID option,
2.
press the Edit softkey, and then enter a
new Admin VLAN setting.
Press the Validate softkey and then press
3.
the Save softkey.
Unlock network configuration options.
1.
Scroll to the DHCP Enabled option and
2.
press the No softkey to disable DHCP, or
press the Yes softkey to enable DHCP.
Press the Save softkey.
3.
4-11
Advertisement
Table of Contents
Troubleshooting
