Understanding The Phone Startup Process - Cisco 7906G Administration Manual
Unified ip phone for cisco unified callmanager 4.1(3)
Hide thumbs
Also See for 7906G:
- Administration manual (278 pages) ,
- User manual (112 pages) ,
- User giude (90 pages)
Table of Contents
Advertisement
Chapter 2
Preparing to Install the Cisco Unified IP Phone on Your Network
Understanding the Phone Startup Process
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
A phone accesses a default configuration file named XmlDefault.cnf.xml from the
TFTP server when these conditions exist:
You have enabled auto-registration in Cisco Unified CallManager
•
The phone has not been added to the Cisco Unified CallManager Database
•
The phone is registering for the first time
•
If auto registration is not enabled and the phone has not been added to the
Cisco Unified CallManager Database, the phone registration request will be
rejected. In this case, the phone will reset and attempt to register repeatedly.
If the phone has registered before, the phone will access the configuration file
named SEPmac_address.cnf.xml, where mac_address is the MAC address of the
phone.
When connecting to the VoIP network, the Cisco Unified IP Phone goes through
a standard startup process, as described in
network configuration, not all of these steps may occur on your
Cisco Unified IP Phone.
Understanding the Phone Startup Process
Table
2-3. Depending on your specific
2-7
Advertisement
Table of Contents
Troubleshooting
