Configuring 802.1X Authentication; Default 802.1X Configuration - Cisco Catalyst 2950 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
Configuring 802.1X Authentication
Configuring 802.1X Authentication
The section describes how to configure 802.1X port-based authentication on your switch:
•
•
•
•
•
•
•
•
•
•
•
Default 802.1X Configuration
Table 8-1
Table 8-1
Feature
Authentication, authorization, and
accounting (AAA) authentication
RADIUS server
•
•
•
Per-interface 802.1X enable state
Periodic re-authentication
Number of seconds between
re-authentication attempts
Quiet period
Retransmission time
Catalyst 2950 Desktop Switch Software Configuration Guide
8-6
Default 802.1X Configuration, page 8-6
802.1X Configuration Guidelines, page 8-7
Enabling 802.1X Authentication, page 8-8
Enabling Periodic Re-Authentication, page 8-10
Changing the Quiet Period, page 8-11
Enabling Multiple Hosts, page 8-13
shows the default 802.1X configuration.
Default 802.1X Configuration
IP address
UDP authentication port
Key
Chapter 8
Configuring 802.1X Port-Based Authentication
(required)
(optional)
(optional)
(optional)
Default Setting
Disabled.
None specified.
•
1812.
•
None specified.
•
Disabled (force-authorized).
The port transmits and receives normal traffic without
802.1X-based authentication of the client.
Disabled.
3600 seconds.
60 seconds (number of seconds that the switch remains in
the quiet state following a failed authentication exchange
with the client).
30 seconds (number of seconds that the switch should
wait for a response to an EAP request/identity frame
from the client before retransmitting the request).
(required)
(optional)
(optional)
(optional)
(optional)
78-11380-04
Advertisement
Table of Contents
Troubleshooting
