Cisco Catalyst 2950 Software Configuration Manual page 222
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
Using the Interface Command
Enter the show interfaces privileged EXEC command to see a list of all interfaces on or configured for
the switch. A report is provided for each interface that the device supports or for the specified interface:
Switch# show interfaces
Vlan1 is up, line protocol is up
Hardware is CPU Interface, address is 0030.85f5.7200 (bia 0030.85f5.7200)
Internet address is 172.20.135.102/27
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type:ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters never
Input queue:0/75/0/0 (size/max/drops/flushes); Total output drops:0
Queueing strategy:fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
168738 packets input, 12529173 bytes, 0 no buffer
Received 56994 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
246794 packets output, 23981814 bytes, 0 underruns
0 output errors, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
FastEthernet0/1 is down, line protocol is down
Hardware is Fast Ethernet, address is 0030.85f5.7201 (bia 0030.85f5.7201)
MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed
input flow-control is off, output flow-control is off
ARP type:ARPA, ARP Timeout 04:00:00
Last input 1d21h, output 1d21h, output hang never
Last clearing of "show interface" counters never
Input queue:0/75/0/0 (size/max/drops/flushes); Total output drops:0
Queueing strategy:fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
20214 packets input, 2753835 bytes, 0 no buffer
Received 18380 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 254 ignored
0 watchdog, 16167 multicast, 0 pause input
0 input packets with dribble condition detected
20823 packets output, 1481235 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
<output truncated>
GigabitEthernet0/1 is up, line protocol is down
Hardware is Gigabit Ethernet, address is 0030.85f5.7219 (bia 0030.85f5.7219)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed
input flow-control is off, output flow-control is off
ARP type:ARPA, ARP Timeout 04:00:00
Last input never, output 2d00h, output hang never
Last clearing of "show interface" counters never
Catalyst 2950 Desktop Switch Software Configuration Guide
9-6
Chapter 9
Configuring Interface Characteristics
78-11380-04
Advertisement
Table of Contents
Troubleshooting
